1. Pull the crown out to the first grid and turn it up to adjust the calendar. As shown in the figure below:
2. Pull out the first one, then the other one, and adjust the time in the second one. After adjustment, turn it upward. As shown in the figure below:
Extended data:
Debugging matters of Armani watch
First, the upper and lower two of the three keys on the right side of the dial are manual timing keys. Press the up key to start or stop timing, and press the key to reset the pointer to zero.
First, press the key to start timing. At this time, the second chronograph hand (the longest and thinnest hand) in the middle of the big dial and the hands of the two small dials above began to run. Because the dial on the left is minutes, it won't show the walk until 1 minute, one meter per minute. After 30 minutes, it will return to its original position and start again.
On the right, the dial pointer of110 seconds will remain motionless until counting stops. When you press the key again to stop counting, the second hand and minute hand will stop immediately, and the dial pointer of 1 10 seconds will automatically point to a certain scale, so that the second hand points to10 and the minute hand points to1. Press the key again and all hands will return to zero.
Second, the minute and day adjustment key in the middle of the key
Because of Armani's airtight and waterproof design, you need to loosen the button counterclockwise before adjustment, and then pull it out. The first stage is to adjust the date, and the second stage is to adjust the time. After adjustment, push the lever back and tighten it clockwise, and the adjustment is over.
References:
Armani official website-Product Description
References:
Baidu encyclopedia-Armani