The reasons are as follows: 1. System USB flash drive error. 2.2 There is a problem. Windows image file. The solution is as follows: 1. Go to the U disk startup tool official website on the system homepage, and then download the software. Download address: U disk reloading system. 2. After the software is successfully installed, insert the USB flash drive. 3. Select one-click production. 3. Wait a few minutes for the USB flash drive to be successfully produced. Download the ghost image file of the system and put it in the GHO folder of the startup disk. 4. Restart the computer, enter the BIOS to set the USB flash drive to start, and the entry method is displayed in the lower left corner. 5. Restart after the setting is successful, automatically advance to the PE menu of the USB flash drive, and select the first question. 6. After entering the PE desktop, open the PE of the system house, and the system will automatically select the appropriate settings. Answer OK directly and begin to reinstall the system. 7. Reloading the system interface Reason 2 Solution: Go directly to official website to download the image file. Download address

2. Why can't I always install the system with a USB flash drive?

There are two conditions for starting USB flash drive: starting USB flash drive and system image GHO.

First, start producing USB flash drives.

1, download a USB flash drive making tool on the computer (common making tools are Chinese cabbage and peaches);

2. Make the U disk into a startup disk with the U disk making tool. Pay attention to the default USB-hdd when selecting the production format.

Second, the system image of GHO

1. Download a "WIN7 64-bit Ultimate Edition" system file on the computer;

2. Decompress the file with the suffix iso, and you can see the mirror file with the suffix gho, and copy it to the U disk for later use.

Third, the system installation

1. Set the USB flash drive to start: press Del to enter the bios interface when restarting the computer. In the BIOS function setting, set the boot order to USB-HDD(USB flash drive must be started). Press ESC once after setting, return to the BIOS main interface, select Save and Exit, and save and exit the BIOS setting (some computers can press F 10 directly).

2. System installation: Insert the USB flash drive into the computer. When you start the computer, you will enter the USB flash drive startup interface and select "Run Windows PE". After that, the computer will display some icons and select "Manual Installation". After entering the installation mode, all pop-up windows are in English. It doesn't matter. Move the mouse, press 1, 2,3 to open another window, and then select the prefix u or USB. This process is a bit long.

3. After the progress bar is completed, pull out the USB flash drive and restart the computer. Some drivers installed in the system will take some time to complete, and you will be prompted not to operate the mouse and keyboard.

When everything is installed, your system can be used.

It sounds tedious, but it's actually very simple.

The key to system installation is to start the production of U disk, download the mirror image GHO, and set the U disk in the computer BIOS. Others just follow the instructions.

3. Error in reinstalling the system using USB flash drive.

1. Set the USB flash drive to start: press Del to enter the bios interface when restarting the computer. In the BIOS function setting, set the boot order to USB-hdd (USB flash drive needs to be started). Press ESC once after setting, return to the BIOS main interface, select Save and Exit, and save and exit the BIOS setting (some computers can press F 10 directly).

2. System installation: Insert the USB flash drive into the computer. When you start the computer, you will enter the USB flash drive startup interface, and select "Run Windows PE". After that, the computer will display some icons and select "Manual Installation". After entering the installation mode, the pop-up windows are all in English. It doesn't matter. Move the mouse, press 1, 2,3 to open another window, and then select the prefix u or USB. This process is a bit long.

3. After the progress bar is completed, pull out the USB flash drive and restart the computer. Some drivers installed in the system will take some time to complete, and you will be prompted not to operate the mouse and keyboard.

4.u disk, full name USB flash drive, English name "USB flash drive". It is a miniature high-capacity mobile storage product, which uses USB interface and does not need physical drive. Connect with computer through USB interface to realize plug and play.

5. The name of USB flash drive comes from a new storage device produced by Netac Technology, which is called "USB flash drive" and is connected through USB interface. After the USB flash drive is connected to the USB interface of the computer, the data of the USB flash drive can be exchanged with the computer. However, the equipment with similar technology produced later, because Netac has registered the patent, can no longer be called "USB flash drive", but changed its name to "USB flash drive". Later, the name U disk was widely known because it was easy to remember, and it was one of the mobile storage devices. There are many USB flash drives that support multi-ports, that is, three-way USB flash drives (USB computer port, iOS Apple interface, Android interface).

4.USB flash drive installation system error.

How to install the system with USB flash drive

1. The steps of the traditional U disk installation system are as follows. In the early stage, you must consider whether your motherboard supports u *** startup, otherwise you will not find u *** devices in bois.

2. Then download the ghost version of the image file, and then decompress *. Put the ghost file in the non-system disk and directory, and then download the ghost U disk version with one click.

3. Then insert the USB flash drive, run the ghostU USB flash drive version program to change the working mode of the USB flash drive, and then install it like a fool.

4. Then reboot into the motherboard and set it to u *** -hd to boot, and then enter the English version of ghost interface to install the system.

Through the above steps, you will find it more troublesome to operate, and the motherboard must also support u *** startup. That is, if you successfully enter the desktop after installing the system with a USB flash drive, you will also find that the operation interface has become a big face (no graphics card driver), no sound (no sound card driver), no networking (no network card driver), etc., and it will also cause the loss of data files.

Say goodbye to USB flash drive system, and you can install the system without USB flash drive.

Kingsguard 3.0' s fool-like reinstall the system tool can help users reinstall the system without CD-ROM drive, USB flash drive, operating system installation CD-ROM or installation files and hardware driver files. After going through five steps: preparing for reset, backing up data, installing system, recovering data and completing reset, the system can be reset, and you can get a fast, light, stable and brand-new system.

The first step is to prepare for reset.

The second step is data backup, including the backup operation of chat records of instant messaging software (QQ, Fetion, etc.). ), mail data (Outlook, Foxmail, etc. ), browser configuration data (Firefox, Chrome, IE, etc. ), system settings (EFS encryption private key, windows address book, ADSL account information), desktop folder of my document series folder, and even hardware driver.

Installation system

The fourth step is to recover the data.

The fifth step is reset. When reinstalling the system, the hardware driver is also installed, which can be used directly.

In addition, users can use the recovery function to automatically recover and install hardware drivers.

5. Can't access the computer system. Reinstalling the system with USB flash drive fails every time.

How to reinstall the system:

1, download the old cat

2.ISO system or gho format system. (Download from System House)

3.u disk is greater than1g. If win7 is installed, it is definitely not enough, and it needs more than 2G.

Exercise:

1. After downloading, first unzip the ISO file or the GHO file, then open the installation, and then insert the tool you want to make the system disk.

Then turn on the old pickup, and then initialize the device (that is, format). Don't worry about the rest, just make a USB flash drive with one button. Shortly after completion, the file extracted from the ISO file has a suffix. GHO suffix format (that is, the file used to install the system is generally smaller than that downloaded by ISO, not a few MB, which is easy to find anyway, but the file decompressed by ISO is arrogant). Open the USB flash drive and put this file in the GHO folder of the USB flash drive. That's it. As for the system in GHO format, you can extract it directly and throw it into the GHO folder of the U disk.

Then restart the computer and enter the BIOS settings. If you don't want to set up, Baidu your mobile phone, know what brand of your computer motherboard is and what shortcut keys you use, then enter the boot interface, select the second option, enter the PE system, enter the partition tool, and then manually, instead of directly partitioning with one key, automatically. Select several disks and formats. Then click Save.

Open the old green hair-picking installation tool below and restore GHOST to drive C.

2. Download ISO direct installation, and find a file with hard disk installation in the extracted file. Click to restore the system to drive C.

6. Computer U disk installation system

There may be a problem with the system image. Just download a system image file again and install it.

1. Download the USB flash drive startup disk making tool of USB flash drive installer and make it into a startup disk.

2. Download the system image file and put it in the "GHO" folder of the U disk startup disk.

3. Restart the computer and insert the U disk into the USB interface of the computer.

4. When the boot screen appears, press the computer boot shortcut "F 12" to enter the USB flash drive to install the main PE system.

5. After entering the PE system, click "One-click Reinstall System" on the desktop.