The manufacturing method of the red rope bracelet is to prepare the red rope, thread the red rope around the hole, then thread the small circle through the hole, pull it down from the left, and finally weave a button knot to make it.
1, prepare the red rope.
2. Go around a small hole.
3. Pinch a small circle on the right.
4. Put the small circle in the hole.
5. tighten.
6. The rope on the right is pulled from the left.
7. Put the left rope under the right rope. ?
8. The rope on the left goes through the biggest hole in the picture.
9. Tighten it in the direction of the rope.
10, the same method to the length you want.
1 1. Tie a knot at the end and make a circle.
12, make another circle below.
13. Get off the left line and cross the right line.
14. The first hole goes in and the second hole comes out.
15. The line on the right goes around from the upper left and then passes through the middle space.
16. The line on the left bypasses the upper right and then passes through the middle space.
17, just tighten it along the line.
Matters needing attention in weaving red rope bracelet:
You must be patient when knitting red rope bracelets. Don't worry, every step needs careful weaving.