Five-grain mill has changed the shortcomings of iron mill, such as rough appearance, loud noise, coarse powder output, difficult cleaning and insufficient motor power, and the processed food has reached the GMP food hygiene requirements. So who are the manufacturers of whole grain mills? Let's take a look at the introduction.

Basic structure and working principle

The coarse cereals pulverizer is mainly composed of a feed hopper, a rotor, a toothed disc, a sieve, a shell, a base, a motor and other parts. After the material enters the crushing chamber, it is quickly crushed into fine powder or slurry under the constant impact of round teeth and flat teeth and the friction of toothed discs, and is discharged out of the room through the sieve holes through the discharge port under the action of centrifugal force and airflow.

Manufacturer's suggestion on whole grain mill

(1) Xu Lang 820 Grain Factory of Hangzhou Saixu Food Machinery Co., Ltd.

(2) Gu Weifang G- 10 15 Grain Mill, Shanghai Bangu Trading Co., Ltd.

(3) Guangzhou Daxiang Electronic Machinery Equipment Co., Ltd. Daxiang DX-55 Household Grain Crusher

(4) Tong Lei M03 stainless steel mill of Shenzhen Tong Lei Industrial Co., Ltd.

(5) Lei Mai MF-304B stainless steel granulator, Guangzhou Lei Mai Machinery Equipment Co., Ltd.

(6) Jiangyin Xiangda Machinery Manufacturing Co., Ltd. Xiangda 20B Grain Crusher

(7) Tian Lei 250B stainless steel mill of Tian Lei Machinery Factory in Songgang, Baoan District, Shenzhen.

(8) Jiangyin Zhenfeng Pharmaceutical Machinery Co., Ltd. Zhenfeng 20 Whole Grain Mill

Characteristics of whole grain mill

1, easy to operate: (1). The old machine can be installed only by aligning the groove of the grinding disc with the key strip on the motor shaft, and the third type can be installed only by casually putting on the grinding disc, which is very convenient;

(2) There are steel balls on the surface of the old grinding disc, but there are no steel balls on the third type, so there is no possibility of falling off and sticking with butter;

2. The parts in contact with the materials in the machine cavity are not coated with butter, so that the ground materials can be kept sanitary and clean. The cavity of the old machine must be coated with butter, and the third machine does not need any lubricant to ensure cleanliness and no pollution;

The sound is quite low (or much lower). Parts are processed accurately, the inspection procedures are strict, and unqualified parts are not used. After the machine is assembled, it has been tested and strictly checked by engineers, which ensures that the whole grain mill strictly meets the design requirements, and the noise of the machine is low when running, which will not affect the surrounding environment, so that every customer can use it with confidence, and the processed products meet the basic requirements of exquisite hygiene.

4. Fine grinding. After repeated efforts by R&D personnel, the grinding sheet is low in sound and fine in grinding, which can grind sesame, walnut, almond, cucumber seed, wax gourd seed, medlar, codonopsis pilosula and other materials with high oil content or high sugar content to the minimum, thus solving the problem that ordinary mills cannot grind the above materials.