Solutions to the problem that the ice machine does not drop ice:

1. The ice cubes are too thin, so that all the ice cubes melt on the ice tray before they fall off. Make the second plate of cubes.

Solution: Adjust the ice thickness probe. If it is a screw adjustment, turn the screw inward to make the ice thicker. That is to say, the farther the iron piece of the ice thickness probe is from the ice plate, the thicker it is, and vice versa.

2. The ice tray is too dirty

Solution: Clean the ice tray. Generally use gram and acidic liquid to clean the ice tray

3. Desoldering the ice tray

Solution: Desolder the front of the ice tray, directly remove the desoldered one, and remove the desoldered one on the reverse side. The copper pipe is desoldered, please replace the ice tray. If it can be repaired and welded, consider welding.

4. The metal of the ice tray and the plastic parts on the side are separated and cracked

Solution: Apply silicone to the cracked area again

5. Condensation water The water output is too large, and there is still condensed water being discharged during defrost.

Solution: Adjust the pressure water stop valve to make the water outlet smaller

Ice machine maintenance and cleaning:

1. After using the ice machine The ice cubes in the refrigerator need to be cleared. When cleaning the ice machine, turn off the power, do not flush the machine with a water pipe directly, use clean water and add an appropriate amount of neutral detergent (acidic, alkaline and other corrosive solvents are strictly prohibited) to wipe the machine enclosure and inner tank, and then Wipe clean with a soft cloth.

2. The ice machine must unscrew the water inlet hose head and clean the water inlet valve filter every two months to avoid sand and mud impurities in the water from clogging the water inlet, causing the water inlet volume to decrease and causing failure. Make ice.