If the reference voltage of the detected voltage inside the machine is deviated, E3 will display an error. The former can only be used after the voltage is restored, and the latter can only be solved by contacting Jiuyang Sunshine Service.
The display of Jiuyang electric pressure cooker has the following meanings:
1. Overheating caused by dry or burnt food-overhaul sealing ring.
2, no water and food heating-water and food as required.
3, no inner pot-put the inner pot.
4. The display board is faulty-replace the display board.
5. Temperature controller failure-replace the temperature controller.
6. Pressure sensor failure-replace the pressure sensor.
7. The cover microswitch is installed incorrectly or damaged-readjust or replace the cover microswitch.
8. The temperature sensor is installed incorrectly or damaged-readjust or replace the temperature sensor.
Extended data:
First, failure: the indicator light is not on.
1, the current power supply is not connected, whether the building materials power supply is connected.
2. Line failure.
Second, the fault: the indicator light is on, and the heating plate does not heat.
1, circuit failure.
The heating plate is out of order.
Third, failure: the appointment time indicator light is on at the same time.
There is a circuit fault in the rice cooker.
Fourth, fault: the heating plate does not heat.
1, circuit failure.
The fuse of the rice cooker is blown.
The heating plate is out of order.
Five, fault: automatically enter the heat preservation function.
1. If you don't put the can, cut off the power supply, and then put the can to continue after the temperature in the pot drops.
2. Dry the liner without water and cut off the power supply. After the inner pot is cooled, add water to the inner container for further use.
3. The liner is not put in place and is in a hanging state. It is necessary to wait for the temperature of the inner pot to drop before putting the liner.
Sixth, fault: the rice is not cooked.
1, cooking too much or too little; Adjust the total capacity of rice and water, ranging from the highest scale line to the lowest scale line.
2. The ratio of rice to water is wrong; The ratio of rice to water needs to be adjusted.
3. The inner liner of the rice cooker is not put in place and is in a suspended state; Gently rotate the liner to return it to the normal heating position.
4. There are foreign objects between the liner and the heating plate; We only need to clean up foreign bodies, but we can't wash them directly with water.
5. The gasket is deformed.
Seven, current fault.
Sensor failure.
Eight, fault: cooked into burnt rice
1. The internal container is not properly placed and is in the hanging position. Adjust the position of the gasket to make it return to the normal position and work.
2. The gasket is deformed.
3. Circuit failure.
4. Sensor failure.
Nine, fault: a large number of porridge spilled out of the pot.
A large amount of spill indicates a large amount of cooking, so it is necessary to adjust the amount to a moderate position.
References:
Baidu encyclopedia-Jiuyang iron pot rice cooker