1, open the upper cover (clockwise and counterclockwise);
2. Put the dried medicine into a crushing box;
3. Tighten the upper cover;
4. Plug in the power supply and turn on the timer switch;
5. When the rolling sound is relatively uniform, it means that the medicine has been ground into powder and can be turned off;
6. Open the upper cover and pour out the powder; 1. Install the machine body on the frame, install the feed hopper and the discharge hopper, and tighten all screws. Install the motor, motor wheel and machine wheel in the same plane, and the V-belt is moderately elastic.
2. The lines and switches are reliable and the working voltage is stable. This line is well grounded.
3. Fasten the turntable inside the machine and tighten the round teeth and flat teeth. The spindle rotates flexibly, and it fits the rotating direction of the machine after the power supply is connected (the motor direction can be adjusted according to the wiring diagram), and the machine can be put into operation after running for a few minutes without abnormal noise.
4. Self-matching power should make the spindle speed of the pulverizer reach the technical data. 1, for the personal safety of users, the power supply must be grounded;
2. The crushed materials must be dry and not suitable for processing wet and oily Chinese medicines;
3. The crushed drugs shall not exceed half of the capacity of the crushing tank;
4. Generally, it takes only half a minute to crush traditional Chinese medicine and only one minute to crush hard medicine;
5. This machine can't be used continuously for a long time, and the starting time should not exceed 5 minutes at a time. If the processing capacity is large, it should be used at intervals to prevent the bearing from overheating and damaging the motor;
6. Do not start the switch when the upper cover is open;
7. After long-term use, the carbon brush and blade are seriously worn and need to be replaced;
8, often check the blade screw, must be tightened.