Kitchen:
Kitchen is a very important part of home decoration. The quality of kitchen decoration directly affects the mood when cooking, but under normal circumstances, there will be a lot of things in the kitchen that look messy. Although there are cabinets that can be used to put things, not everything can be put in the cabinets, but how to decorate them to be beautiful and easy to use? Here I introduce some acceptable methods to you.
Electrical sockets are essential for the use of modern electrical appliances, but the reservation and installation should be considered comprehensively.
The electricity in the kitchen refrigerator should be directly connected from the main switch box to the refrigerator socket. This is mainly because if you go out temporarily for a few days, you can leave only one line of electricity for the refrigerator as long as you turn on the main switch, and other electrical appliances can be turned off when not in use.
The appliances on the kitchen cabinet include electric cooker, microwave oven, soymilk machine, induction cooker, range hood, dishwasher, electric faucet, etc. Therefore, the insertion position should be kept in the original position. In order not to plug in electricity frequently, it is best to have a switch on each socket board. The socket of the range hood should be equipped with a time control switch. For example, the time of the induction cooker is 10 minute, and the time control switch can be adjusted to 12 minute.
Now more and more people plan not to install range hoods at home. Then you may ask, what should we install? Let me show you today. Now there is such a method to remove oil fume, which is both energy-saving and easy to use. You should install one when you go home. This kind of thing is called unpowered range hood, and many friends can see it on the roofs of some factories. It is usually made of stainless steel. Nowadays, more and more people build their own houses. They like to install one that can rotate automatically without any power support. It can be said that it is completely energy-saving and environmentally friendly.
There are water purifiers, kitchen treasures (water heaters), disinfection cabinets, dishwashers and kitchen waste shredders under the kitchen cabinets. For these appliances, it is essential to use the socket in advance and keep it in place.
Every time I look at other people's kitchens with all kinds of artifacts neatly placed, I realize that there is a big gap between my own kitchen and theirs. Is it because I didn't install these tools Actually, you don't have to spend that money at all. As long as you add three boards, you can also put needles in drawers and cabinets and plug them where necessary.
drawer
Although kitchen drawer storage is the most common, it may become a mess if it is not planned well. Don't say it's just uncomfortable to look at, and it will take up a lot of space. It is difficult to get a bowl, but in fact, as long as five partitions are added to the drawer, this problem can be solved immediately. If you live on the lower floor, you are worried that the drawer will be easy to regain moisture. It is recommended to use an orifice plate.
If it is a drawer specially used for storing dishes, it is also practical to add an orifice plate at the bottom of the drawer. This orifice plate is tailor-made according to the dishes at home, which can not only play a fixed role, but also play a role in ventilation of the drain frame.
The design of drawers at home is unreasonable, and it is a bit wasteful to leave some of them on things. Adding a wooden board will instantly turn them into two small drawers, with pots and pans under them and the lids on them just right, so don't worry about some glass lids being easily broken when they collide.
The added board must be shorter than the width of the drawer, so as not to hinder the storage of the drawer below.
Staff Committee
Some owners have more kitchen cabinets and fewer drawers. In fact, adding a few boards to the cupboard can double the storage effect. The cupboard is too high and deep to hold small items. Don't worry, divide the cabinet into 10 small spaces with 9 boards. Of course, the specific partition in the cabinet depends on what you put. This method is very practical whether it is a flat cupboard door or a chest of drawers. After closing the cupboard door, it is completely invisible and things will not be staggered.
In addition, it is suggested that the partitions of drawers and cabinets should be designed to be movable, so that it will be much more convenient to change them in the future, and it will be good to take them down. If this drawer is specially customized, you only need to change the drawer if you want to put other big items in the future, which is a waste of money.
The kitchen is the place with the most small objects in the house. Now all drawers and cabinets have partitions, making full use of the upper vertical space. It is possible to double the storage space. Aren't you excited?
Extended storage space
At present, the corners of most cabinets are 90 degrees, which is prone to dead ends and the storage of things is limited. However, this problem can be solved just after the tray is installed, so compared with the traditional cabinet corners, the storage space of cabinets with trays will be larger.
Convenient to take things.
Generally, things in the corner of the cabinet are more troublesome to pick up, and it is easier to take away things close to the outside every time, and if you want to take out things inside, it will definitely mess up the surrounding things. It's best to put all these things on this rotating tray. If you want to take the contents, just turn the tray.
1. Remove the pole of the original cabinet corner;
2. Please ask the carpenter to make five circular trays with the same size (radius is about 15cm), and it is best to make a small "guardrail" around the trays with transparent plastic, as shown in the following figure:
3. Then punch holes in the corner of the cabinet.
4. Install all trays in turn, and finally the floor will be spared. For better use, it is suggested to add a rotatable device under the tray, which is more convenient to take things at ordinary times.
After all the trays are installed, just put all the things that need to be stored neatly on them. Don't underestimate this small tray, the load-bearing performance is still very good, and it is no problem to put dozens of pounds of items. Then you need to pay attention to the following two points:
① The size of the tray should not be too large, depending on the width of the cabinet partition. If it is too big, it will take up a little space and it is not convenient to rotate.
(2) Ensure the elasticity of the bottom of the tray, especially for cabinets that store more things.
So when you design a kitchen cabinet in the future, don't complain about the trouble of holding it in the corner of the cabinet. Might as well learn from friends and add a rotating tray in the corner. All problems can be solved at once, which is convenient and practical and will not waste space. My family must try it next time!