1. Steps of pasting wallpaper with glutinous rice 1. Each package is mixed with 2KG glutinous rice glue, generally 25-30m2, so as to fit (depending on the material) and must be diluted. 50% of the liquid 4 of water can be used. If you want to paste wallpaper, you can soak it for 5- 10 minutes after bonding.
2. Don't forget to measure the distance between the dashboard, the wall and the line hammer in the step of sticking rice and wallpaper, and find out each vertical reference line. In addition, when wrapping, make sure that each part is completely vertical, so as to draw a few marks on the top.
3, according to the height of the object to operate, 10cm fabric, so there may be wallpaper.
4. glue. At this time, you can even apply glue on the back of the wallpaper, and it will take about 5-7 seconds to get on the wall.
Second, the steps of pasting wallpaper with sticky rice-note 1, the adhesive coating should be uniform and hard, and it should not be brushed, wrapped or piled up to prevent contamination.
2, the wall can't ooze water, and the second is to keep it clean and smooth. The dry wall and three walls must be free of powder, especially when the weather is fine.
3. glutinous rice glue does not need to add rubber powder to adjust rubber powder. Rubber powder and other wallpaper adhesives with 400g /m2PVC usually do not need to be bonded with rubber powder.
4, should be dry, dry and wet paste, evenly spread on the back of the wallpaper, and then dry for 5 minutes. This time, you can use a scraper on the wall to remove the adhesive.
This paper introduces the steps of pasting wallpaper with sticky rice. If you use glutinous rice glue, you can follow the above method. This avoids some phenomena in the process of attachment.