Teach you how to make a USB flash drive startup disk
2
Then we Baidu searched for "win 10 system GHOST version download" and downloaded it ourselves. Of course, you can also download our GHOST WIN 10 file according to the download address of the network disk provided by me.
three
Decompress the ISO file downloaded from the GHOST WIN 10 system first, and then find the GHO file, which is the largest file after decompression, usually 2G or 3G. As shown in the figure, copy the decompressed GHO file to your own USB flash drive, so that you can install it directly with this file in the future.
four
Then we set up a USB flash drive to start the computer when it is turned on. Different computers have different ways to set up a USB flash drive to start the computer. Everyone can enter their own BIOS settings, usually by pressing F2 or DEL when the computer is turned on.
1 How to set up USB flash drive in BIOS for Lenovo notebook?
five
After booting from the U disk, we choose to enter the PE system in the startup interface, as shown in the figure.
six
After entering the WINPE interface of our Chinese cabbage U disk startup disk, click the one-click installation program of Chinese cabbage PE on the desktop to open it, as shown in the figure, and you can directly open this to operate.
seven
This interface is more important. Click Restore System, and then we will open the image file of win 10 system of GHO version on the U disk. Of course, it's ok if you have a win 10 GHO file on your computer, then select drive C, and finally click OK here to start waiting for the system installation.
eight
At this time, the system GHOST file installation interface as shown in the figure will appear, so we will wait patiently for a while.
nine
After the GHOST file recovery interface is completed, we need to restart the computer at this time, and the installation process of win 10 system will only begin after the computer restarts. Follow the prompts in the following steps. Tip: After restarting the system, it is recommended that you enter the BIOS settings and set the hard disk boot to avoid problems.
10
After the computer restarts, the installation of WIN 10 system will begin. In this process, everyone will follow the prompts and operate step by step. The installation method is also relatively simple until we complete the installation of the system. It takes about 10 minutes to install win 10 system with ghost version. Try it yourself.
The operation method is as follows:
1 Download and install ultralISO software;
Download the original windows system image file (ISO format) from the "msdn" website;
3. Insert the USB flash drive startup floppy disk, open the newly downloaded system image file and burn it to the USB flash drive (the USB flash drive selects FAT32 file system);
4 To the computer where the system needs to be installed, plug in the USB flash drive;
5. Turn on the computer and use the startup device selection menu to select from the USB flash drive; Start installing the system.
How to install the esd format of win 10 image into the mirror disk of Chinese cabbage? The software used is Di *** ++, which can be downloaded by Baidu search. No installation is required. After downloading and decompressing, you can directly execute Di *** ++, but pay attention to whether your system is 64-bit. X86 refers to a 32-bit system.
Safety warning. Let it go.
Di *** ++ can not only convert ESD files into ISO image files, but also has many other functions. Novice mode is recommended.
After entering, click File-Format Conversion -ESD-ISO.
ESD files are preferred. Browse the downloaded Windows 10 ESD file.
The second option is where you need to convert ESD files into ISO files. What is the name?
seven
Perform decryption of the target file.
How to install ghost Win8 system with cabbage USB flash drive;
1. Tools: USB flash drive with appropriate size, Chinese cabbage USB flash drive making tool, system image file; 2. Install the Chinese cabbage U disk making tool on the computer, plug in the U disk, and make the startup U disk;
3. Copy the system image file to the USB flash drive;
4. Start the computer with the Chinese cabbage USB flash drive and enter the Chinese cabbage WINPE system;
5. According to the type of the system, select the corresponding tools in WINPE to install the system.
Directly installed on the hard disk (provided that there is XP system or WIN7 system).
(1) Download a GHOST system online, remember that the suffix is. Iso, and save to the hard disk (except c disk).
(2) backup the data needed for disk C.
(3) Download a virtual CD-ROM drive, click on the extracted GHOST system, find "setup.exe" in it, and then install it, just ten minutes.
It is complicated to set up a USB flash drive in BOOS and then install it in PE. This paper introduces an online one-click ordering and recharging method.
Recharge system: You can directly install the system online. For example, you can use * * * silk one-button recharge system to install online.
System official website:: dsonekey.
Go to official website-click to download the system you need (XP/win7/win8/win8.1/win10)-after downloading, click Install directly.
Official website has its own graphic tutorial for your reference.
Take the installation of Ghost version of WIN7 as an example: insert the prepared U disk of Chinese cabbage into the u *** interface (desktop users suggest inserting the U disk into the u *** interface on the back of the main chassis), and then restart the computer. When the startup screen appears, use the startup shortcut key to guide the USB flash drive into the main menu interface of Chinese cabbage, select "02 Execute Chinese cabbage Win8PE anti-blue screen version (new computer)" and press enter to confirm.
Log in to the desktop of cabbage installation pe system, and the system will automatically pop up the window of cabbage PE installation program, and click "Browse (b)".
Locate and select the downloaded and unzipped system GHO image file, and then click Open.
Select a disk as the target disk for installing the system, and click OK (Y) to enter the next operation.
In the prompt window that pops up, click OK (y) to start installing the recovery system.
Wait patiently for the restore system to release the specified system disk.
After the release is completed, the computer will automatically restart, wait patiently for the computer to restart, and then start with the hard disk. The automatic installation process of the system completes the driver installation and system setup.
Hello, I have seen that your question has not been answered for a long time, but if you don't answer it within the time limit, you will not be deducted and your reward points will be confiscated! So I'll give you some suggestions: First, you can choose to ask questions in the right category, so that more people will know the answers to your questions and more people will answer them. Second, you can go to the professional website forum related to your problem, where there are many professionals who can definitely solve your problem. Third, you can ask your online friends, they will be more sincere and enthusiastic to find the answer for you, and even go directly to the relevant websites to search. Fourthly, there are many professional forums and knowledge platforms on the Internet, which also contain a lot of information. I often go to forums to seek solutions to professional problems. Fifth, ask your questions carefully and clearly! Make it easier to understand its meaning! Thank you for taking my advice! !
step
1 First, we make a Chinese cabbage boot USB flash drive, and then unzip the downloaded ghost win8ISO image file. We copy the largest gho file in the unzipped file and paste it into the GHO folder of the U disk!
If we want to install the WIN8 Ghost version of the system in the future, we will first insert the U disk into the computer, and then press the delete key of the keyboard to enter the BIOS settings when the computer is turned on. In BIOS, we will set the USB flash drive as the first boot disk, which is the first boot sequence! Of course, different computers may enter the BIOS in different ways. Some computers need to be turned on, press F2 of the keyboard and so on! After we set the USB flash drive in the BIOS, press the keyboard F 10 to save the settings and restart the computer!
3 after restarting the computer, it will automatically enter the Chinese cabbage startup interface, and we choose to realize the Chinese cabbage win8pe simplified system.
After entering the winpe system, we click on the desktop cabbage pe one-click installation program!
4 In the interface that appears, we select the path of the GHOST file, and the default is our U disk. Of course, you can browse by yourself.
Then we click finish to restart on the interface and select "Yes" to continue!
At this point, we will copy the ghost installation file to our own computer. At this time, we can wait patiently! The computer will restart after the copy is completed!
After the computer is restarted, WIN8 system will be automatically installed. All we need to do is wait patiently!
We know that the following interface appears, and our win8 system has been successfully installed! Let's start our WIN8 tour!
Method/step 1. First, let Chinese cabbage start the USB flash drive. The manufacturing method of Chinese cabbage startup USB flash drive can refer to the experience/article /E5C39Bf58E579239D7603323. Then decompress the downloaded ghost version of win8ISO image file, and copy and paste the largest gho file in the decompressed file into the GHO folder of the U disk. 2. To install WIN8 Ghost system in the future, first insert the U disk into the computer, and then press the delete key of the keyboard to enter the BIOS settings when the computer is turned on, and set the U disk as the first boot disk in the BIOS, that is, the first boot sequence. Of course, different computers may enter the BIOS in different ways. Some computers need to be turned on, press F2 of the keyboard and so on. After setting and starting the USB flash drive in the BIOS, press the keyboard F 10 to save the settings and restart the computer. 3. After restarting the computer, it will automatically enter the Chinese cabbage startup interface, and choose to execute the Chinese cabbage win8pe simplified system. 4. After entering the winpe system, click on the cabbage pe one-click installation program on the desktop. 5. In the interface that appears, select the path of GHOST file, and the default is U disk. Of course, you can also browse the gho file yourself, and then choose to install it on the C drive and confirm the installation. 6. Click Restart on the interface after completion, and select "Yes" to continue. 7. At this time, the ghost installation file will be copied to your computer, so just wait patiently. After the copy is completed, the computer will restart. 8. After the computer is restarted, the WIN8 system will be automatically installed. What needs to be done is to wait patiently. 9, until the win8 system is successfully installed.