Add a blue lampshade or use a blue light bulb.

1, put blue glass, blue cloth and blue pigment outside;

2. Buy a blue LED and put it on.

3. If it is a blue light for fishing, press the switch again, or change the light switch again. Generally, blue lights for fishing have two white lights and one blue light.

4, white light to blue light detailed steps:

1, purchase blue LED tubes.

2. Remove the original white light diode and weld the blue light diode.

3, blue light effect

Buy a flexible metal tube to fix the flashlight, which can be bent and shaped freely.

4. It can be installed on a fishing chair, a fishing box or plugged into the ground.

5, the practical effect is super cool, and you can see it clearly when you eat it.

6. Friends with electrician experience can change their own systems.

2. Help: How did white light turn into blue light?

Analysis: Two major reasons are estimated, and the aging test is analyzed simultaneously, and the aging method is consistent with accelerated aging. Estimate the reason

1: insufficient heat dissipation of the radiator (after changing the lamp bead, the fault remained. Later, it was found that the silicone grease was coated excessively, and the contact between the lamp bead heat sink and the star plate was not good after welding. After changing the lamp bead, the lamp bead heat sink and the pin were directly welded to the star plate, and the radiator and the star plate were still fixed with heat-conducting silicone, so the aging problem was solved)!

Estimated reason 2: phosphor aging (this lamp bead is a combination of YAG phosphor excited by blue chip and RGB white light, and the phosphor with poor quality will age and fail under the high temperature chip "baking". Can't excite yellow and green light, other raw materials and assembly process remain unchanged, only change the lamp beads, and test 5 lamp beads (2 overseas and 3 domestic manufacturers), and the fault remains the same) Conclusion: The problem is found out, that is, the lamp bead heat sink is not welded well with the star board (and there is too much silicone grease), so the more silicone grease, the better, and enough filling is enough. The lamp bead heat sink is directly welded to the board, reducing the thermal resistance and solving the problem! The problem encountered by the landlord is similar, Xu Ran is low power, but the method of analyzing the reasons is the same, you can try!

3. How does PS change white light into orange light?

1, first click the Photoshop icon to open the ps software, click the file button in the menu bar after loading is completed, and select the open button in the file drop-down option to open our material pictures.

2. After opening the material picture, click on the background layer in the layer area to copy and create a new layer 1. The new layer 1 here is mainly to prevent the pixel loss of the original image layer after color reduction.

3. After creating a new layer 1, click the image option in the menu bar, select Adjust in the drop-down menu option of the image, and then click the color balance option to open the color balance setting panel.

4. After opening the color balance setting panel, we need to modify the specific parameters, which can be adjusted according to the actual effect and debugged several times until the color effect is satisfactory.

5. After the color balance adjustment is completed, copy the layer 1 and create a new layer 1 copy the layer, click the layer blending mode modify button, and click the soft light mode in the drop-down options.

6. After all the layers are adjusted, Ctrl+U calls out hue/saturation, and slightly adjusts the overall color of the graphics, so as to finally get our yellow warm light effect.

4. How does PS change white light into orange light?

1, first click the Photoshop icon to open the ps software, click the file button in the menu bar after loading is completed, and select the open button in the file drop-down option to open our material picture. 2. After opening the material picture, click the background layer of the layer area to copy and create a new layer 1, where the new layer 1 is mainly to prevent the pixel loss of the original image layer after color reduction.

3. After creating a new layer 1, click the image option in the menu bar, select Adjust from the drop-down menu option of the image, and then click the color balance option to open the color balance setting panel. 4. After opening the color balance setting panel, we need to modify the specific parameters. Here, we can adjust it according to the actual effect and debug it several times until the color effect is satisfactory. 5. After the color balance adjustment is completed, Copy the layer 1 and create a new layer 1 to copy the layer. Click the modify button of the layer blending mode, and click the soft light mode in the drop-down options. 6. After all the layers are adjusted, Ctrl+U will call out the hue/saturation, and slightly adjust the overall color of the graphics, so as to finally get our yellow warm light effect.