You can make a mobile phone bracket out of paper tube, cut a gap on both sides of the paper tube, and then put the mobile phone on it. The following is the specific production method for your reference. First, preparation materials: paper tubes and scissors.

1. First prepare a paper tube and a pair of scissors, and then cut an inverted triangle on one side of the paper tube with scissors, as shown in the figure.

2. Similarly, cut an inverted triangle on the other side of the paper tube, and pay attention to the alignment of the inverted triangles on both sides, as shown in the figure.

3. After cutting the inverted triangle on both sides, cut the paper in front of the paper tube flat, as shown in the figure.

4. Then cut a gap on both sides of the paper tube, as shown in the figure.

5. Fold the paper on both sides of the gap as shown in the figure.

6. Finally, put the phone on it.

Second,

Tools needed: cardboard, glue gun, brush, scissors, art knife.

1, prepare a rectangular cardboard first.

2. Draw a road on the cardboard.

3. Cut out the shape along the path.

4. Apply glue around with a glue gun.

5. Stack 4 pieces of cardboard made in the same step.

6. Prepare two rectangular pieces of cardboard.

7. Cut into 4 pieces.

8. Glue the cardboard with glue gun.

9. Put another piece of cardboard on it and stick it on.

10, pile up two pieces of cardboard and smear them on the edge with a glue gun.

1 1. Draw a point on the cardboard with a glue gun.

12, such a mobile phone bracket is ready.