Click on the map to see the details.
The whole journey is about 45.69 km/1 hour and 5 minutes.
Drive 93 meters northwest from the starting point.
Turn left and drive southwest along 2 17 for 693 meters.
Turn right and drive west along Hangtou Street for 357 meters.
Turn left and drive west along Wulin Road 1.25km.
Go straight along G3 1618.98km..
How to take the driving route from Xingguo in Jiangxi to Guangze Expressway in Fujian: the whole journey is about 34 1.4 km.
Starting point: Xingguo County
1. Xingguo county driving scheme
1) Start from the starting point to the west, drive along Hakka Road for 90 meters, and turn right into Fenghuang Avenue.
2) Drive along Fenghuang Avenue 150m, cross Shaoji Village on the right and turn left into Changgang Road.
3) Drive along Changgang Road for 220 meters and turn right ahead.
4) Drive 4.5km, pass the Yangmeikou on the right side for about 140m, and then turn right.
5) Drive 1.7km, pass the right corner for about 50m, and then turn right.
6) Drive 60 meters and turn left.
7) Drive 1.9 km and turn left ahead.
8) Drive 5.2km, pass the Yuelongkou on the left for about 70m, and then turn right.
2. Drive 480m and go straight into Quannan Expressway.
3. Drive along Quannan Expressway for 80.7 kilometers, turn right slightly in the direction of Guangchang/yingtan, and enter Ningdu Hub.
4. Drive along Ningdu Hub for 520 meters, cross Ningdu Hub for about 880 meters, and go straight into Jiguang Expressway.
5. Drive along Jiguang Expressway 145.0km, turn right slightly in the direction of Nanping/Fuzhou, and enter Cheng Nan 2 Hub.
6. Drive 650 meters along Cheng Nan No.2 Hub and go straight into Yin Fu Expressway.
7. Drive along Yin Fu Expressway for 34.2km, at Lichuan exit, turn right slightly and enter Lichuan Interchange.
8. Drive 700 meters along Lichuan Interchange. After crossing Lichuan Interchange for about 920 meters, go straight into Jingchuan Avenue.
9. Drive along Jingchuan Avenue 1.7km and go straight into Jingchuan Avenue.
10. Drive along Jingchuan Avenue for 90 meters, take the second exit, turn right ahead and enter Dongfanghong Avenue.
1 1. Drive along Dongfanghong Avenue for 2.2km and turn right into S2 14.
12. Drive along S2 14 for 9.5km, cross the right Daijia Bridge for about 160m, and go straight into S332.
13. Drive along S332 for 28.9 kilometers, and then turn right.
14. Drive14.7km and go straight into G3 16.
15. Driving plan of Guangze County
1) Drive along G3 16 for 3.6 kilometers, turn left slightly and enter Wulin Road.
2) Drive along Wulin Road 1.3km, turn right slightly and enter Hangtou Street.
3) Drive along Hangtou Street for 360m, turn left and enter 2 17 Road.
4) Drive along 2 17 road for 690 meters and turn right.
5) Drive 90 meters to the finish line (on the left side of the road).
End point: Guangze County
Where do I drive from Taihe, Jiangxi to Guangze Expressway, Fujian? The whole journey is about 372.438+0 km, passing through Yongfeng, Lean, Yihuang and Jinxi.
Starting point: Jiangxi Taihe
1. Taihe county traffic plan
1) Start from the starting point to the west, drive along the Avenue of Workers, Peasants and Soldiers for 3.3km, and turn right into G3 19.
2) Drive 7.6 kilometers along G3 19 and turn left into Taihe Interchange.
2. Drive along Taihe Interchange for 6 10 meters, turn right ahead and enter Daguang Expressway.
3. Drive along Daguang Expressway for 32.9 kilometers, head for Ji 'an/Nanchang, turn right slightly, and enter Jill Zhang Expressway.
4. Drive along Zhangji Expressway for 750 meters and go straight into Zhangji Expressway.
5. Drive along Zhangji Expressway 15.6km, turn right slightly in the direction of Jishui/Yongfeng/Fuzhou, and enter the Ji 'an North Hub.
6. Drive 480 meters along Ji 'an North Hub and go straight into Fuji Expressway.
7. Drive along Fuji Expressway for 2 18.4km, and go straight on the ramp.
8. Drive along the ramp for 9 10 meters, turn right ahead and enter Jiguang Expressway.
9. Drive along Jiguang Expressway for 8.3km, at Zixi/Shazhou exit, turn right slightly and enter Zixi main bridge.
10. Drive along Zixi main bridge for 5 10 meters. Go straight after crossing the main bridge of Zixi for about 530 meters.
1 1. Drive for 7.3 kilometers and enter G3 16.
12. Follow G3 16 for 29.5 kilometers, and turn left into Taber Avenue.
13. Follow Taber Avenue1.8km, then turn right.
14. Drive for 330m, turn left and enter G3 16.
15. Drive along G3 16 19.6km and go straight into Gongjiabian tunnel.
16. Drive along Gongjiabian tunnel for 490 meters and go straight into G3 16.
17. Drive along G3 16 for 20.6 kilometers, turn left slightly and enter Wulin Road.
18. Drive along Wulin Road 1.3km, turn right slightly and enter Hangtou Street.
19. Driving plan of Guangze County
1) Drive along Hangtou Street for 360m, turn left and enter 2 17.
2) Drive along 2 17 road for 690 meters and turn right.
3) Drive 90 meters to the finish line (on the left side of the road).
End point: Guangze County
How many kilometers is it from Fujian Guangze to Jiangxi Guixi? Driving route: the whole journey is about 235.9 kilometers.
Driving route: the whole journey is about 235.9 kilometers.
Starting point: Guangze County
1. Nanping driving plan
1)? Go northwest from the starting point, drive for 90 meters, turn left and enter 2 17 west road.
2)? Follow 2 17 west road for 690 meters and turn right into Hangtou Street.
3)? Drive along Hangtou Street for 360 meters and turn left into Wulin Road.
4)? Drive along Wulin Road 1.3km and go straight into G3 16.
5)? Drive 8.8km along G3 16, cross the sinkhole and turn left.
2. Drive 14.9 km, cross Suzhou Pass and go straight to S332.
3. Drive along S332 for 32.8km and go straight into Rishang Avenue.
4. Drive along Rishang Avenue for 430m and turn left into Dongfanghong Avenue.
5. Drive along Dongfanghong Avenue for 2.0km, cross Kangshu Bridge for about 2 10/0m, and go straight into the roundabout.
6. Drive around the island for 90 meters, take the second exit, turn right ahead and enter Jingchuan Avenue.
7. Drive along Jingchuan Avenue 1.8km and go straight on the ramp.
8. Drive along the ramp for 660m, drive towards Nanchang, turn right slightly and enter Lichuan Interchange.
9. Drive 450m along Lichuan Interchange, cross Lichuan Interchange and enter Yin Fu Expressway at the entrance.
10. Drive along Yin Fu Expressway for 36.3km and go straight into Jiguang Expressway.
1 1. Drive along Jiguang Expressway for 98.5km and get on the ramp at yingtan South/yujiang county County /G320 Exit.
12. Drive along the ramp for 780m, drive in the direction of yingtan, turn right slightly and get on the ramp.
13. guixi city internal drive scheme
1)? Drive along the ramp for 90 meters, turn right ahead and enter Yingnan Avenue.
2)? Drive along Yingnan Avenue for 6.3 kilometers, head for Yingtan City/Guixi, turn right ahead and enter the roundabout.
3)? Drive around the island 180m, take the second exit, turn right ahead and enter Sanchuan Avenue.
4)? Drive along Sanchuan Avenue for 4 10 meters and turn left into Harmony Road.
5)? Drive along Harmony Road for 490 meters, then turn right into Gymnasium Road.
6)? Drive along Stadium Road for 3.0 kilometers, then turn right into South Station Road.
7)? Drive along South Station Road for 630 meters and turn left into Sanchuan Avenue.
8)? Follow Sanchuan Avenue 1.9 km and go straight into G320.
9)? Go along G32013.4km and turn left into Yegong South Street.
10)? Drive along Yegong South Avenue for 290 meters, after passing Mawu Gaojia for about 230 meters, turn right and enter Xiong Ying Avenue.
1 1)? Drive along Xiong Ying Avenue for 4.9 kilometers and go straight into North Street.
12)? Drive along North Street for 5 10 meters and go straight into Jianshe Road.
13)? Drive along Jianshe Road for 2.9 kilometers, turn left at the pond about 100 meters too early.
14)? Drive for 20 meters and turn left ahead.
15)? Drive150m and turn left into Fuhe Road.
16)? Drive along Fuhe Road 190 meters, and reach the terminal (on the right side of the road).
Destination: guixi city.
How many kilometers is the driving route from Zixi County, Jiangxi Province to Guangze County, Fujian Province? The whole journey is about 54.4 kilometers.
Starting point: Zixi County
1. Fuzhou driving plan
1) Drive 4.0km northeast from the starting point and turn left ahead.
2) Drive for 340 meters and turn right ahead.
3) Drive 390 meters and turn left.
4) Drive 690 meters, pass Ande on the right for about 80 meters, then turn right and enter G3 16.
5) Drive 5.9 kilometers along G3 16, turn left slightly and enter Siqian Road.
6) Drive along Siqian Road1.8km and go straight into G3 16.
7) Follow G3 16 1. 1 km and turn left into Dajue Mountain Avenue.
8) Drive along Dajue Mountain Avenue 1. 1 km, turn left slightly and get on the ramp.
2. Drive along the ramp for 440 meters and go straight into Ningguang Expressway.
3. Drive along Ningguang Expressway for 34.3km, turn right slightly and get on the ramp.
4. Drive along the ramp for 590 meters and go straight.
5. Nanping driving plan
1) Drive 1.0 km, turn right and enter G3 16.
2) Follow G3 16 1.2km, turn right slightly and enter Wenchang East Road.
3) Drive along Wenchang East Road for 470 meters, turn right slightly and enter 2 17 Road.
4) Drive along 2 17 for 9 10 meters and turn left.
5) Drive 90 meters to the finish line (on the left side of the road).
End point: Guangze County
I only know how to drive from Jinhua, Fujian to Guangze County Expressway. Gaoshu Highway in Jinli District, at Quzhou Toll Station, there is a newly-built Gaoshu Highway that goes directly to Fuzhou. It should take 3 or 4 hours to get there. I don't know exactly. This year, I took a trip to Wuyishan from this road, which is quite convenient. It's closer than Wenzhou.
How many kilometers is it from Ji 'an City in Jiangxi Province to Guangze City in Fujian Province? Usually you go to yingtan by train at night, and then turn shiny. It was already dawn when we arrived, hehe.
Train route from Shanghai to Fujian Guangze: The whole journey is about 731.3km..
Starting point: Shanghai
1. Shanghai urban driving plan
1) Drive 40 meters southeast from the starting point and turn right into Renmin Avenue.
2) Drive 420 meters along Renmin Avenue and turn left into Huangpi North Road.
3) Drive along Huangpi North Road for 2 10 meters, pass the Shenyuan Building on the right for about 70 meters, and enter Yan 'an East Road.
4) Drive along Yan 'an East Road for 350m, cross Yan 'an East Road overpass for about110m, and enter Chongqing Middle Road.
5) Drive along Chongqing Middle Road for 330 meters, turn right slightly and enter Chongqing South Road.
6) Drive 30 meters along Chongqing South Road, drive towards the north-south elevated road, turn right slightly and get on the ramp.
7) Drive 500 meters along the ramp and go straight into the north-south elevated road.
8) Drive along the North-South Elevated Road 1.6km, cross Zhenghe Commercial Building on the right, turn slightly right in the direction of Inner Ring Elevated Road/nanpu bridge/Humin Elevated Road/Tibet South Road Tunnel, and enter the Luban Road Overpass in the Inner Ring Road.
9) Drive along the Luban Road overpass in the inner ring for 320 meters, cross the Luban Road overpass in the inner ring for about 400 meters, and go straight into the inner ring viaduct.
10) Drive along the inner ring viaduct for 3. 1 km, pass the Huangzhong Building on the left for about 1.0 km, then turn right slightly in the direction of Humin viaduct/Xinzhuang overpass/Shanghai South Railway Station, and enter the Caoxi Road overpass in the inner ring.
1 1) Drive 420 meters along the Caoxi Road overpass in the inner ring, cross the Caoxi North Road overpass in the inner ring, and go straight into Humin Elevated Road.
12) Drive 6.9 kilometers along Humin Elevated Road, cross Dianpuhe Bridge on Humin Road, and go straight into Shanghai-Kunming Expressway.
2. Drive along the Shanghai-Kunming Expressway 1.2km, cross the Xinzhuang overpass and go straight into the Shanghai-Kunming Expressway.
3. Drive along Shanghai-Kunming Expressway for 25.2km, cross Youdungang Bridge, turn left slightly and enter Shanghai-Kunming Expressway.
4. Drive along Shanghai-Kunming Expressway 1.2km, cross Dagang Overpass and go straight into Hangzhou Bay Ring Expressway.
5. Drive along Hangzhou Bay Ring Expressway for 53.0km, heading for Hangzhou/Shaoxing/Taizhou /G 15W, turn right slightly and enter Shanghai-Kunming Expressway.
6. Drive along Shanghai-Kunming Expressway 1. 1 km, cross Jiaxing Hub and go straight into Shanghai-Kunming Expressway.
7. Drive along the Shanghai-Kunming Expressway for 43.7 kilometers, cross the Chang 'an public railway, turn right slightly in the direction of Shaoxing/Wenzhou/Jinhua /G250 1 (East Section) and enter the Shanghai-Kunming Expressway.
8. Drive along Shanghai-Kunming Expressway for 390 meters, pass Uncle Shen new york for 480 meters, and go straight into Hangzhou Ring Expressway.
9. Drive along Hangzhou Ring Expressway for 4 1.2km, turn right slightly in the direction of Jinhua/Wenzhou /G60, and enter Shanghai-Kunming Expressway.
10. Drive along Shanghai-Kunming Expressway for 670 meters, cross Zhangjiafan Hub and go straight into Shanghai-Kunming Expressway.
1 1. Drive along Shanghai-Kunming Expressway for 23 1.2km, head for Jiangshan/Hua Kai/Nanping/Huangshan, turn right slightly and enter Wuli Hub.
12. Drive along Wuli Hub 1.5km and go straight into Beijing-Taiwan Expressway.
13. Drive along Beijing-Taiwan Expressway for 205.2km, cross Chongyang River Bridge, turn right slightly in the direction of Wuyishan/Shaowu/Nanchang/Shangrao, and enter Xingtian Hub.
14. Drive along Xingtian Hub for 700 meters and go straight into Shang Ning Expressway.
15. Drive along Shang Ning Expressway for 9.2km, then turn right slightly in the direction of Shaowu/Nanchang/Pujian Expressway /S03 1 1 and enter Xiaba Hub Interchange.
16. Drive along Xiaba Junction Interchange for 920m, cross Xiaba Junction Interchange and go straight into Pujian Expressway.
17. Drive along Pujian Expressway for 55.7 kilometers and turn right slightly in the direction of S 10/ Shaowu/Shuibei/Guangze.
18. Drive along the ramp for 820 meters and go straight into Ningguang Expressway.
19. Drive along Ningguang Expressway for 35. 1km, exit G3 16/ Guangze/Wuyi Tianchi, and turn right slightly on the ramp.
20. Drive along the ramp 1. 1 km and go straight.
2 1. Driving plan of Guangze County
1) Drive 1.0 km, turn right and enter G3 16.
2) Follow G3 16 1.2km, turn right slightly and enter Wenchang East Road.
3) Drive along Wenchang East Road for 470 meters, turn right slightly and enter 2 17 Road.
4) Drive along 2 17 for 9 10 meters and turn left.
5) Drive 90 meters to the finish line (on the left side of the road).
End point: Guangze County
How to take the self-driving route from Danyang, Fujian to Guangze County: the whole journey is about 795.2 kilometers.
Starting point: Danyang City
1. Zhenjiang driving plan
1) start from the starting point to the west, drive 1 10 meters, and turn left.
2) Drive 170 meters and turn left into Lanling Road.
3) Drive along Lanling Road for 650 meters and turn right into Qiliang Road.
4) Drive along Qiliang Road for 2.5km and turn left into Airport Road.
5) Drive along Airport Road for 5.0km, pass Gutangba on the right for about 3 10m, and then turn right slightly on the ramp.
2. Drive along the ramp 1.0km and go straight into Shanghai-Chengdu Expressway.
3. Drive along Shanghai-Chengdu Expressway 2 1. 1 km, turn right slightly in the direction of Taizhou Bridge/Wujin/Taizhou/Yangzhong, and enter Luoxi Hub.
4. Drive along Luoxi Hub 1. 1 km, cross Lujiaqiao and go straight into Jiang Yi Expressway.
5. Drive 25.3km along the Yanjiang Expressway, head for Changzhou (South)/Changshu, turn left slightly, and enter the hub of Wujin High-tech Zone.
6. Drive along Wujin High-tech Zone Hub 1.3km, cross Longqing Bridge, and go straight into Changhe Expressway.
7. Drive along Changhe Expressway for 5. 1km, at the entrance of Changzhou (South)/Wuhan, turn right slightly and get on the ramp.
8. Drive along the ramp 1.9 km and go straight into Changwu Road.
9. Drive along Changwu Road 1.4km, and go straight into Hucao Line.
10. Follow the Hu Cao line 1 10 meters, and go straight into Changwu Road.
1 1. Drive along Changwu Road for 9.5 kilometers and go straight into Changcao Road.
12. Drive along Changcao Road for 3. 1 km, cross Xie Qiao, head for Shanghai-Nanjing Expressway/Jiangyin Bridge/Nanjing-Hangzhou Expressway, turn right slightly and get on the ramp.
13. Follow the ramp1.4km and go straight into Hu Yi Expressway.
14. Drive along Hu Yi Expressway for 29.2km, head for Yixing/Hangzhou, turn left slightly and enter Xiwu Hub.
15. Drive along Xiwu Hub for 470 meters. After crossing Xiwu Junction for about1.3km, go straight into Shen Chang Expressway.
16. Follow Shen Chang Expressway 12 1.9 km, Ningbo/Huangshan/Qiandao Lake /G250 1, turn right slightly and enter Nanzhuangdou Hub.
17. Drive along Nanzhuangdou Hub for 30 meters, cross Nanzhuangdou Hub for about 950 meters, and go straight into Hangzhou Ring Expressway.
18. Drive along Hangzhou Ring Expressway for 33.4km, turn slightly right in the direction of Qiandao Lake/Fuyang, and enter Hangzhou South Hub.
19. Drive along Hangzhou South Hub for 920m, cross Hangzhou South Hub for about130m, and then go straight into Shen Chang Expressway.
20. Drive 74.6 kilometers along Shen Chang Expressway and go straight into Hangxinjing Expressway.
2 1. Drive along Hangxinjing Expressway for 57.6 kilometers, turn right slightly and get on the ramp.
22. Drive along the ramp 1.3km and go straight into Longliwen Expressway.
23. Drive along Longliwen Expressway for 35.3km, go to Quzhou /G60 (west), turn right slightly, and enter Lutangjiao Hub.
24. Drive 400 meters along Lutangjiao Hub, pass Lutangjiao Hub for about 490 meters, and go straight into Shanghai-Kunming Expressway.
25. Drive along the Shanghai-Kunming Expressway for 42.3km, head for Jiangshan/Hua Kai/Nanping/Huangshan, turn right slightly and enter Wuli Hub.
26. Drive along Wuli Hub 1.5km and go straight into Beijing-Taiwan Expressway.
27. Drive along Beijing-Taiwan Expressway for 205.2km, cross Chongyang River Bridge, head for Wuyishan/Shaowu/Nanchang/Shangrao, turn right slightly, and enter Xingtian Hub.
28. Drive 700 meters along Xingtian Hub and go straight into Shang Ning Expressway.
29. Drive along Shang Ning Expressway for 9.2km, turn right slightly in the direction of Shaowu/Nanchang/Pujian Expressway /S03 1 1, and enter Xiaba Junction Interchange.
30. Drive 920 meters along the Xiaba Hub Interchange, cross the Xiaba Hub Interchange and go straight into Pujian Expressway.
3 1. Drive along Pujian Expressway for 55.7 kilometers and turn right slightly in the direction of S 10/ Shaowu/Shuibei/Guangze.
32. Drive along the ramp for 820 meters and go straight into Ningguang Expressway.
33. Drive along Ningguang Expressway for 35. 1km, exit at G3 16/ Guangze/Wuyi Tianchi, and turn right slightly on the ramp.
34. Drive along the ramp 1. 1 km and go straight.
35. Nanping driving plan
1) Drive 1.0 km, turn right and enter G3 16.
2) Follow G3 16 1.2km, turn right slightly and enter Wenchang East Road.
3) Drive along Wenchang East Road for 470 meters, turn right slightly and enter 2 17 Road.
4) Drive along 2 17 for 9 10 meters and turn left.
5) Drive 90 meters to the finish line (on the left side of the road).
End point: Guangze County
Hello, landlord, the self-driving route from Yongkang to Fujian Guangze.
If you are in go on road trip, you can check the tour route through Tencent Map.
Tencent Maps provides many services such as map browsing, address query, interest point search, bus transfer, driving navigation, bus route and site query in more than 400 cities across the country.
Multi-layer selection: food and entertainment information is smooth, real-time road conditions, away from congestion, and all the way is smooth.
If you turn on real-time traffic conditions, you can also get real-time traffic information of the main streets in the city.
Listen, just navigate and walk. The route introduction is very detailed, and it is safer to drive without looking at the screen of the mobile phone.
I hope my answer will help you.