Designers are the general names of people who design things. Usually refers to a person who creates or provides creative works in a specific professional field, engaged in the combination of art and business. Next, I will bring you a model essay summarizing the designer's annual works. I hope you will like it.
Designer's annual work summary "Model Essay" 1 Maturity and confusion intertwined, X has quietly passed away. In my eyes, the design room is also a battlefield without smoke. It can temper people's will, indifferent people's hearts, and quickly improve their professional quality and mature people's psychology, all of which condense the famous decision-making and correct guidance of each leader.
At the end of the year, people always lament the waste of life. Retrospect and prospect will be two eternal themes. Below I will analyze my gains and losses in the past year from two aspects: professional quality, external communication and internal cooperation.
As an architectural professional designer, the promotion of professional ability is the most important.
Over the past X years, through a large number of construction drawings, I have a deeper understanding of the process and methods of architectural design and a certain understanding of building codes. At the beginning of this year, I set myself the goal of being able to operate the general project independently, including its overall planning, scheme design, rendering performance and later construction drawing design. Ability comes from practice, and practice tests ability; Over the past year, I have walked step by step in accordance with the established goals. Some goals may have been achieved, and some goals may still have a certain gap, as shown in the following aspects.
First, the overall planning ability
In X years, through the master plan of X residential area, the master plan and design of X property right house, the master plan adjustment of X commercial center and the master plan of a commercial and residential area in the city center, I have a deeper understanding of planning knowledge and have a certain practical ability. In order to facilitate communication with Party A, I strive to learn more about the trends and trends of real estate development, speculate on the commercial purpose of developers with my heart, and strive to find the perfect combination of designers and developers. As a designer, he mainly controls the floor area ratio, building density, greening rate, building height and spacing through the current national norms and local government departments. Secondly, the determination of basic column network, the connection between fire escape and residential road network, and the choice of architectural style are also several problems that a mature designer must skillfully solve. I pay special attention to the above problems in my work and deal with them properly. When encountering problems, I humbly asked leaders and senior experts, and achieved good results and accumulated a lot of valuable experience.
Second, the performance of the renderings
As a means of expression, renderings are the most intuitive expression of architectural design works, which determines the overall style of the building and is also a very important reason for developers to choose the whole scheme. Therefore, I think the performance of renderings is a very important part in the early stage of architectural design, and it is also a basic skill that I must master. Over the past year, through the rendering of X Guest House, X Overpass, X Hotel and X Villa, I have mastered the design software such as 3dmax and photoshop, and combined with my own understanding of architectural form, made a general single rendering. However, the aerial view of large commercial buildings and communities is still lacking, and I still need to study and practice continuously.
Three. Programme capacity
Planning ability is an important ability that architects should possess. A good plane planning is directly related to the three basic elements of architecture: applicability, economy and aesthetics. Over the past year, I have participated in the design of most of the company's projects. In the graphic design of X Garden and _ _, I followed the design team leaders to consult materials, make field trips, work hard and ask for advice modestly, and successfully completed the established tasks. During this period, entrusted by the leader, I also independently completed the plan design of the flat facade, villa and X building of the garrison guest house. In the layout of the plane column network, I first roughly arranged the structural column network according to my own ideas, and then asked my colleagues in the structural group to help me check whether it was reasonable. Invisibly enhanced the concept of structure and enriched professional knowledge. In the process of independent design, I found many shortcomings, especially the lack of understanding of the basic theory of the opposite scheme, which must be strengthened first in the future work.
The model essay summarized by the designer's annual work has been fleeting for two years, and my time in the advertising department has been fruitful. Have the joy of harvest, live in harmony with colleagues, work happily every day, and feel disappointed when encountering difficulties and setbacks. Generally speaking, with the leadership of the manager and the strong assistance of colleagues, the work task was successfully completed in 2000, and the graphic design ability was rapidly improved and matured.
Do some single pages, posters, renderings and some simple installation work. All the work seems complicated and varies in size, but they all have a common feature, that is, showing the company's external image everywhere, promoting products and opening up markets. Therefore, we must not be careless. Without careful investigation, we may make mistakes, which will directly affect the overall external image of the company and even cause indirect economic losses to the company.
Since I entered the company, I have a deep understanding of the company's workflow and methods. In the design process, I found many shortcomings, especially the grasp of the design scheme and the lack of basic theoretical knowledge. Different from art design, because design should be beautiful, practical, artificial and people-oriented, in the process of design, I understand the concept of unfinished design, and design needs to be constantly improved, constantly improving and challenging myself.
Design is a purgatory of pain and happiness. When faced with major design tasks, full of pressure, it is easy to collect all kinds of data (including words and pictures), then look for design inspiration, meditation and anxiety, and finally have satisfactory creativity. Every time you work hard, your labor achievements are affirmed by everyone, which is happiness at work! Full of joy. Over the past year, under the guidance of Manager Ye and _ _ _, I have different views on design, and started to have my own ideas and know how to think about these problems. From my ignorance of design to my confidence in my work now, I really appreciate the platform that the company gave me and the training and care of the company leaders. I learned a lot from Mr. Li and saw the constant innovation and change of things, which I have never been exposed to.
On the whole, the past year was a tense, busy and fulfilling year. Ability comes from practice, which tests ability, but it needs continuous study and practice to make your major further.
Essay on the designer's annual work summary 3 Domestic automobile design started relatively late, and the real independent design (currently only in the reverse stage) only happened in recent years, while the design of interior and exterior decoration was relatively late. The reason may be mainly because in the past, designers mainly focused on the design of white body, thinking that as long as the white body was designed, the car would come out. Another reason may also be that users don't pay much attention to the shape requirements of cars.
Until recent years, more and more users can afford cars, and the requirements for cars are getting higher and higher, not only for performance, but also for appearance. In this way, in the process of designing a car, the interior and exterior decoration of the car occupy more and more weight in the design process.
Appearance decoration is the first sight, and its importance is self-evident. For users, the interior decoration of a car has the longest close contact with itself, which can directly affect its own parts. Its appearance is beautiful, its comfort is good or bad, and its components are easy to operate. , all directly affect the user's mood. The integrity of these components needs a reasonable installation structure to ensure.
The following are my personal views on interior design, some of which may be superficial or even wrong. I think these should be excusable. After all, my personal ability and experience are very limited.
Next, analyze it in several steps:
First of all, cooperate with the modeling design to provide data:
Interior design, from modeling to A-plane, and finally to structural design, seems to be a gradual relationship. In fact, these aspects should cooperate and coordinate with each other. In the initial stage of internal modeling, the following internal-related input conditions are required:
1. Main section: At the beginning of automobile design, some main sections are usually made in some important parts as key control parameters in the future, and this parameter needs to be considered in structure and modeling.
2. Hard point: Hard point parameter is also a very important data, which plays an important role in the layout control of the whole vehicle. Hard point parameters related to interior layout are provided at the beginning of modeling, so that the modeling can correctly express the design parameters of the whole vehicle. For example, when designing the side fender, it is necessary to consider the hard point parameters of the straight edge of the car body and the sealing strip of the door frame to make the position of the inner surface of the side fender correct.
3. Draft direction: Generally, there are dermatoglyphics on the inner surface of the interior, and dermatoglyphics also have draft angles, and different dermatoglyphics have different draft angles. Therefore, when modeling the interior decoration, determine the draft direction, so that the draft angle of the interior surface can be initially controlled here, and the inconvenience to the structural design and even the loss caused by rework due to mistakes can be reduced. The draft angle of dermatoglyphics is generally about 3 degrees for fine dermatoglyphics and 5 degrees for coarse dermatoglyphics. Of course, it depends on different dermatoglyphics.
The principle of determining the direction of interior sketch: generally, it is the direction of a coordinate axis of the whole vehicle, or the sketch direction is in a coordinate plane (that is, perpendicular to a coordinate axis);
4. Determination of the overall appearance parameters of the interior decoration: The overall appearance parameters of the interior decoration mainly include the gap between guard plates, section difference, parting line, etc. These parameters directly affect the overall appearance quality of the interior; These parameters are determined by the reasonable installation structure and production technology level, so at the beginning of modeling, these parameters need to be determined reasonably with the modeling, so that not only the overall appearance can be coordinated, but also the installation structure can be designed reasonably.
Second, the installation structure preliminary analysis to determine:
At the same time of indoor modeling, the preliminary analysis and determination of indoor installation structure can also be carried out, that is, the design of installation section. In this process, the following aspects need to be considered and determined:
1. Body installation method:
For the installation method of interior and body, the main requirements are simple, fast, firm and reliable installation. In general, the installation is carried out by using snap connection, and the working environment, performance requirements and installation requirements of each part are analyzed to select or design a reasonable snap to achieve good performance.
In the design process of installation mode, it is important to require each fender or assembly to have a hard installation mode in the coordinate Z direction, which can be metal card installation, some reinforcing ribs installation on the fender, or parts supporting the fender. Its main function is to make the guard plate have a supporting force in the Z axis direction, so as to avoid the damage of the buckle and affect the installation of the guard plate.
2. Indoor decoration room installation method:
There are two main factors in the appearance quality of the interior decoration: clearance and section difference, which are mainly controlled by the installation method between the interiors. In addition to reasonable installation methods (including structure and location, etc.). ), there must also be a reasonable positioning method (try to use points and lines for positioning, and avoid using area positioning, especially large area positioning). At the same time, the installation interaction between interiors should be considered in the overall installation layout, such as door guard assembly and other ornaments.
There is no installation influence, which can be considered as independent assembly and installation, but the installation of other decorative plates affects each other. Although there is no installation requirement between the ceiling decorative board and the upper guard board, there are requirements for clearance and section difference, and there are requirements for installation, clearance and section difference between the upper guard board and the lower guard board, as well as the lower guard board, threshold guard board and carpet. These parts cannot be considered separately, but must be considered together.
3. Installation mode of related components:
There are two ways to install the interior and related parts of the interior. One method is to install them on the interior or on other parts such as the car body through the interior (the interior has a matching relationship with the interior); The other is that there is no installation relationship with interior decoration, but there are boundary constraints.
When designing the internal structure, it is necessary to leave installation space for these related components.
Third, the specific design of the installation structure:
After the indoor modeling is completed, the structural design can be carried out by treating the modeling surface with the surface. However, before the design of the structure, the plane A should be analyzed to see whether the parameters such as order and curvature meet the design requirements and whether the draft angle of the interior decoration is enough. Next, you can design the installation structure.
1, modeling the input and output of design data.
2. Preliminary analysis of installation structure
3. Improvement of structural design
4. The final numerical simulation is analyzed in the later stage.
5. Analysis and adjustment of mold fit.
These five steps can be followed by two steps: structural modularization and scheme modeling.
3. Improvement of structural design
4. The final numerical simulation is analyzed in the later stage.
There are still many things left out between these two steps, such as CAE or proto verification test.
It has been 20 _ _ years since the designer's annual work summary was written. Thank you for your concern and guidance. For me, these bits and pieces are not running water, but engraved in my heart; At the same time, I also want to thank my colleagues for their cooperation and help. I feel very lucky to experience every minute of this year in the big family of the company! Our company has a unique corporate culture, with strict rules and regulations and humanistic care. It can temper people's will, indifferent people's hearts, and quickly improve the professional quality of employees and the psychology of acquaintances, all of which condense the famous decision-making and correct guidance of every leader.
This year is an important critical period for my life planning, so I must be slow and steady. Through the promotion and completion of the design work of several projects, I have a deeper understanding of the process and methods of interior design work and a further understanding of various decoration styles. At the beginning of this year, I set myself the goal of completing the work plan of the first-level and second-level nodes drawn up by the company on time, with good quality and high efficiency. The main tasks are (personal understanding), product research and development, design unit management and follow-up management in the subsequent construction stage.
The most crucial point, or what can best reflect your professional level, is product research and development, which is also the core value of the design management team. Increase the added value of products and enhance the project value, thus improving the affordability of project costs. Although a good product does not necessarily need high cost, a good conceptual design can find a new breakthrough for the project.
Over the past year, I have stepped down step by step according to my established goals. Some goals may have been achieved, and some goals may still have a certain gap, which is embodied in the following aspects.
Scheme: A good scheme is the premise of success or failure of sales offices or model houses. In the past year, I participated in the interior design of _ _ model building, _ _ model building and _ _ office. With the help of the leaders of the design R&D center, I have learned a lot of management modes and design planning concepts, but I still lack basic theoretical understanding of some planning, which needs to be strengthened in future work. Scheme: Scheme ability is an important ability that an interior designer should have, and a good plane is the key to the success of the scheme.
Over the past year, I have participated in the interior decoration scheme design of _ _ and _ _ projects. During the design period, I followed the leaders of R&D Center to consult and understand a large number of cultural materials in Yingkou and _ _ _, and made a field trip. Through hard work and open-minded consultation, I successfully completed the set task. In the process of implementing the design work, I found many shortcomings, especially the lack of overall ability to grasp the scheme, which needs to be improved in the future work.
In addition to the cultivation of professional quality, communication with design companies and cooperation with colleagues are also an essential part of the work. In the early stage of design, we are committed to communication with the marketing center, and it is my consistent position to understand the positioning intention of the company in the project through professional sense of smell, and to communicate and coordinate in time. During the design process, I kept in communication with the group center, city companies and design companies, and summarized the results of communication. After unifying the idea, I reflected it in the design scheme. Collecting and unifying the opinions of relevant departments and leaders in time is beneficial to the subsequent design work. In the design process, if there are design problems, we should dare to admit them and correct them quickly. It's not the fault of design, but it needs to be explained in detail.
In addition, interior design also needs to cooperate with related majors. As the forerunner of other majors, the interior design major in the interior part must take full responsibility for the whole design process. In the process of cooperation, I have a learning attitude and an open mind, and work together to promote the progress of the project.
In order to improve my comprehensive quality, I have strengthened the study of relevant knowledge and enriched my work skills. At the same time, I also read a lot of the latest foreign design cases, which improved my appreciation level. I also studied the ethical philosophy of dealing with people to improve my moral cultivation. All these make me feel the meaning of life pursuit more and more deeply. I don't know whether I am asking too much or I am making too little progress. I always feel that I am still far from my goal. And the longer you work, the more you learn, the more you feel your own shortcomings.
In short, achievements belong to the past and mistakes have become experiences.
In the future work and life, with the continuous expansion of the company's scale and the growth of business volume, we will still face enormous challenges and pressures. Personally, I think there are several points that need special attention.
First, strengthen the cultivation of their own business ability, increase their proficiency in all aspects of design, suffer more and think more, and strive to improve work efficiency;
The second is to enhance the sense of urgency and competition with peers and create an atmosphere of chasing after each other. If you don't study and make progress, you will be eliminated by society;
The third is to strengthen unity and cooperation with the company's internal designers, maintain a peaceful attitude and communicate more.
It has been 20 _ _ years since the designer's annual work summary, and a new year has arrived. Looking back on my work in the past year, with the support and help of the company's leaders and colleagues, I strictly demanded myself and successfully completed my job according to the company's requirements. After entering the company, I feel that the company is growing step by step from the renovation of the new office at first, to the arrival of colleagues, the refinement of division of labor, the cooperation between departments and the improvement of the system. Through one year's study and work, the working mode has made a new breakthrough and the working mode has changed greatly. Now I will summarize the work during this period as follows:
The work of the design department should be a field I am familiar with, mainly responsible for the overall advertising and Meichen design of Impression City Shopping Center. Because my previous job was to design a beautiful shopping center, I am familiar with it, but the plane is a bit poor. In the overall division of labor, the director is mainly responsible for determining the general direction and plane design of the design. I am mainly responsible for the design of beautiful shopping malls and a small number of plane classes, as well as contacting third parties.
10: Company's new office decoration, purchase of materials, installation of telephone network cable, etc. At the end of the month, I designed a part of Impression City Halloween with the director (this part is to make up for Halloween produced by other companies). And the whole company carried out on-site construction.
165438+1October: We began to draw up the theme elements and general direction of Christmas in Impression City, and made corresponding print advertising design and aesthetic design. Party A's opinions are constantly revised.1Construction started in late October, 165438+. During this period, I made the design scheme of Impression City Food Festival. Baolong City Plaza, outdoor, etc.
65438+February: We have done more outdoor activities, posters, activity background walls and so on, and assisted the planning department in doing more activities, purchasing, on-site cooperation and so on.
65438+ 10 month: I started to make a beautiful plan for the Spring Festival in Impression City in the first half of the year, changed it many times and made several sets of plans. Fortunately, the plan was finally implemented. As the staff is fully equipped, the construction of the shopping mall is the responsibility of the outreach colleagues, which is of great help to our design department. Later, I purchased the corresponding props for the activity planning and design of the International Liaison Department.
February: In March, I began to design the dating spring in Impression City, and imagined a beautiful plan with the theme of the ocean. The company will start building houses next year. Because I haven't done the corresponding work before, I feel that my burden is very heavy, and my knowledge, ability and experience are far from my position, so I dare not take it lightly, learn from the director, read more books online and collect more information. I feel that I have made progress on the plane during this time. After this period of study and accumulation, I can deal with the design problems in my daily work. After half a year's training, they have all improved their organizational management ability, comprehensive analysis ability, coordination ability and written and oral expression ability, which ensures the normal operation of all the work in this position, can treat all the work with a correct attitude, love their jobs and work hard to implement them in practical work.
Of course, I also have some problems and shortcomings, which are mainly manifested in the following points: first, commercial advertising is a new field for me, and some work is done while learning, so I can't work easily, and my work efficiency needs to be further improved; Second, some work is not detailed enough, and some work is not well coordinated; Third, my theoretical level is not suitable for the requirements of the company. Fourth, because I prefer to go to work at the card point, I will be late in traffic jams. Fifth, I usually like to browse some websites and read some news information after work. I wonder if there is any violation of company regulations. I will improve these shortcomings and deficiencies in my work next year.
I am very grateful to the company for giving me this growth platform, so that I can keep learning, making progress and improving my quality and talents in my work. Looking forward to the new year, I will continue to work hard and strive for a new level in all my work.