How to get to Nanchang from Wuhan by car?

Self-driving route: the whole journey is about 392.9 kilometers.

Starting point: Wuhan

1. Wuhan city driving plan

1) Drive southeast for 20 meters from the starting point, and then turn left into Jiang Yan Road.

2) Drive along Jiang Yan Road for 420 meters, and then turn left into Sanyang Road.

3) Drive along Sanyang Road for 770 meters, cross Sanyang Square on the right for about 200 meters, and then go straight into Macau Road.

4) Drive along Macau Road 1.5 km and go straight.

5) Drive for 20 meters and turn left into Jianshe Avenue.

6) Drive along Jianshe Avenue150m, turn right and enter Hong Kong Road.

7) Drive along Hong Kong Road1.4km and turn left ahead.

8) Drive 1 10 meters and then turn right into Tangjiadun Road.

9) Drive along Tangjiadun Road for 590 meters and turn left into G3 18.

10) follow G3 18 1.9 km. After passing the Xiao Zhong Building on the right for about 250 meters, turn right slightly and enter Changqing Road.

1 1) Drive along Changqing Road for 2.3 kilometers and turn right slightly.

Go straight for 220 meters, then turn right.

2. Drive 70 meters, at the entrance, and enter the Third Ring Road.

3. Drive along the Third Ring Road for 44.6 kilometers and go straight into Huang Wu Expressway.

4. Drive along Huang Wu Expressway 13.9 km, turn left slightly and enter G70.

5. Drive along G70 for 5 1.7 km, cross Huangshi Toll Station and go straight into Yingbin Avenue.

6. Drive along Yingbin Avenue for 2.0km, turn right and enter the roundabout.

7. Drive around the island for 60 meters, get off at the third exit, and then turn right.

8. Drive 4.3km, pass the Jiangbei gas station on the right for about190m, then turn left slightly and enter G70.

9. Drive along G70 for 89.3km, pass Ouxidun for about 290m, then turn right slightly in the direction of Xiaochi/Jiujiang and enter G70.

10. Drive along G70 for 32.2km and turn left into G 105.

1 1. Follow G 105 for 6.5 kilometers and go straight into G70.

12. Drive along G70113.5km, drive in the direction of Nanchang/Changsha/Guangzhou /G600 1, turn left slightly and enter G600 1.

13. Drive along G600 1 for 4.9 kilometers, turn right slightly and enter Changjiu Expressway.

14. Nanchang driving plan

1) Drive along Changjiu Expressway14.3km, get off at Xinjian County exit and enter Changchun Interchange.

2) Drive 430m along Changleng Interchange, cross Yingbin Bridge, turn right ahead and enter Jiefang Road.

3) Drive along Jiefang Road for 370 meters, turn right ahead and enter G320.

4) Drive along G320 for 2.8km and go straight into Yiyuan Road.

5) Drive along Yiyuan Road for 930m and turn left into Ganjiang Middle Avenue.

6) Drive along Ganjiang Middle Avenue for 320 meters and turn left into Shimao Road.

7) Drive along Shimao Road for 260m and then turn right.

8) Drive 80 meters to the finish line (on the left side of the road).

End point: Nanchang Baidu map