1.

Boot the Dell server and press F 1 1 to select BootManager.

2.

Select the one-shotUEFIbootUEFI one-time startup menu.

3.

Select DiskconnectedtofrontUSB to boot from USB flash drive.

4.

The linux installation interface appears, and the linux system installation steps are entered.

5.i8042: nocontrollerfound may be reported incorrectly.

6. Press Ctrl+X directly to enter the installation interface after modification; If the above error still occurs, the path of the U disk is wrong, and the path of the U disk is determined again.

Press the E key in this installation interface to enter the editing mode.

How does Linux reinstall the system?

1. Insert the recorded installation media into the computer, start the media, and press enter directly when the current interface is displayed.

2. Choose Chinese. The default is Simplified Chinese. Click Continue.

3. Select the version to install.

4. Select the minimum installation. You can choose the server with GUI, that is, the version with desktop, and other additional tools can also be selected.

5. Select the installation location to enter.

6. Select Automatic Configuration Partition. To customize the partition, select the partition I want to configure, and then click Finish.

7. Configure the network and host name to configure IP.

8. After clicking Enter, select the network card connected to the line, and then click Configure.

9. Select General and check Automatically connect to this network when available to prevent the network card from automatically connecting after restarting.

10. Select the IPv4 setting, select the manual connection mode after input, and click Add to add IP.

1 1. Enter the address, sub-mask and gateway, and then fill in the dns server. After filling it out. Click Save.

12. After configuring the above steps, you need to set the root password. Otherwise, the root user will not be enabled.

13. After setting the root password, click Finish. If the password is too simple, you need to click twice to finish.

14. After the system installation is completed, click Restart.

15. After restarting, click-The license is not accepted.

16. Check "I agree to the license agreement", click "Finish", and then click "Go".

Select the interface language.

18. Create an administrative account. When creating an administrative account, the password is difficult and requires English, numbers and special symbols.

After the creation, you can enter the system, thus completing the installation of the linux(CentOS) system.

How to install linux system on the server?

1. Start the CD and select Simplified Chinese or English. If Simplified Chinese is selected, the whole installation process will be in Chinese.

2, choose the type of keyboard, we use the American QWERTY keyboard in China, so keep the default USEnglish. Click Next to enter the next link;

3. Install the system on a local disk drive. Install or update on enterprise storage, such as storage area network. Next enters the next link;

4. Set the host name and click Configure Network to configure the static IP;

5.IP address setting, starting after setting, and then time zone selection;

6. Finally, set the password of the root account to be installed.

How does windows install linux?

To install the linux operating system on a computer with WINDOWS installed, you can reinstall or install multiple systems. When the computer starts, select the operating system you want to use to log in.

Of course, you can also install a virtual machine software under WINDOWS and install a linux operating system in the virtual machine, so that you can use linux by starting the virtual machine in the virtual machine after logging in to WINDOWS.

How to install Linux operating system?

Download Linux.

burn a CD

3. Insert the CD into the computer to be installed.

4. Press F2F 1 1F9 and other shortcut keys to enter the BIOS and adjust the CD to the first position.

5.F 10 save

6 Follow the prompts of the installation wizard to install.