1. In the use of electric pressure cooker, the first to open its lid, usually electric pressure cooker its lid are used in the external rotating lid, in the opening of the lid should be the first to hold the handles cover, clockwise direction to rotate to the limit of its edge, then the lid upward can be lifted.

2. Before putting food into the electric pressure cooker, you should first take out the inner pot, and then put the food into the inner pot, the food and water should not be more than 4/5 of the height of the inner pot, and the food that is easy to expand, such as seaweed, beans, etc. should not be more than 3/5 of the height of the inner pot, but the food and water added should not be less than 1/5 of the height of the inner pot.

3. After adding the water, you need to dry the inner pot and the heating plate, and at the same time, you can not place debris in the outer pot and on the heating plate, and you need to rotate the inner pot left and right when you put it in to ensure that the inner pot and the heating plate are in good contact.

4. When closing the lid, you should first check whether the sealing ring has been placed on the inner steel ring of the lid, and then gently rotate the sealing ring with your hand, so that the sealing ring can be freely and evenly placed on the steel ring, and then cover the lid, rotate the lid counterclockwise to the position of the buckle, and at the same time, you can hear the sound of a clear buckle.

5. Cover the lid, do not think that can be plugged in and used, it is also necessary to place a good pressure-limiting bleeder valve, the bleeder valve will be dialed to the sealing position, and at the same time, check whether the float valve can fall, usually in the unheated before the float valve is down.

6. After the preparatory work can be plugged into the power supply, after the power is turned on, wait until the electric pressure cooker boost light is on, according to the physical type of the corresponding function can be selected.

7. After the food is cooked, the electric pressure cooker will automatically start to deflate, wait until its indicator light converted to yellow heat preservation state, do not immediately dial the pressure-limiting vent valve, wait until the float valve down to deflate.

8. Wait until all the gas in the pot is released, and then unplug it from the power supply, and then hold the lid handle tightly, rotate it clockwise, and open the lid. If the gas in the pot is not discharged and forced to open the lid may cause accidents Oh, be sure to pay more attention to it.