First tools, gabions or other long and thin wooden strips. Cotton thread, gouache paint, knife, paintbrush,

If you are a novice, it is recommended to do the simplest, cross-shaped bracket type.

First, tie the two gimps into a cross, try to cross the one that is leaning forward, the ratio of 4:6. Then on both sides of the gimps from the center of the bracket point to both sides of the bundle up. Ensure that the front edge is pointed, just like an airplane, the front end is small, the back end is large, to reduce wind resistance.

Draw a beautiful kite pattern, you can draw anything you want, write anything you like.

Next is to tie the kite pattern on the gabion, it is better to use a few corners of the tie, stick to the wind will run away, usually if you buy the kite will have a few ties, but if you are making your own, it is recommended to use the cloth type, if there is no tie, you can sew a few lines.

Finally, after tying, tie the cotton thread at the cross brace, so that you can hold the kite. Special reminder: kite flying must be open square oh, one to protect the safety of life, two to the wide field of vision.