1, the displacement is not in conformity with the regulations. There is a water level in the beautiful soymilk machine. When working, the water in the beautiful soymilk machine must be at the water level, and it cannot be too high or too low. You can check the amount of water inside to see if there is a problem of too high or too low water. 2. The nose is unstable. When Midea Soymilk Machine is working, the machine head must be stable and close to the wall, so that it can work normally after being powered on. If it is not tightened, the light will flash after being turned on, and an alarm will appear from time to time. Suggestions and treatment methods: 1, Midea Soymilk Machine will flash the indicator light after the work is completed, but the alarm light will not light up, and this light will only flash for a few seconds. If it keeps flashing, you should pay attention to whether it is a fault. If the alarm indicator light flashes completely, it may be caused by the sensor wire being forgotten to connect and improper operation. I suggest you read the user manual more and then open it again. 2. If the light of the soymilk machine keeps flashing without heating, and the function key on the soymilk machine is pressed, you will hear the click sound of the relay. It is recommended to check whether there is a short circuit between the cup body and the thermostat on the cup body, and there is no click sound. It may be that there is water in the machine or there is something wrong with the power board. At this time, it is recommended to find a professional maintenance staff to check.