Handmade paper lanterns are actually equivalent to making flying lanterns.
Cotton paper can not only make Kongming lanterns, but also be very suitable for making other related or similar handmade paper arts. First of all, the paper art recommended here is to make beautiful lanterns out of cotton paper. We can see that the lanterns made of cotton paper are very exquisite and simple in color and style, and cotton paper also has very good light transmittance, so the light and shadow effect of lanterns made of cotton paper can also be adjusted according to the needs of the producers, thus producing specific and needed effects.
2。 Hang the paper first as shown in the figure. Then spraying flame retardant on the paper can make the paper more resistant to high temperature.
The basic methods of making paper lanterns are explained to help you complete beautiful handmade paper lanterns.
3。 Two different colors of paper can be sealed with white latex, as shown in the figure.
4。 Fold the top paper in half along the long side, and then cut the paper according to the size shown in the figure. Basically, it is similar to a half-drop configuration. You need to prepare four pieces of paper in the same way.
The basic graphic course of handmade paper art Kongming Lantern helps you to make beautiful Kongming Lantern.
Paper roses, as the most classic handmade paper flower production project, can also be presented through the production of cotton paper. The cotton paper rose we see here is a very worthwhile tutorial in terms of its final effect and production method. It can be seen that the overall production method is very simple and easy to use, and the desired effect can be expressed and presented after easy folding. Moreover, because it is simple to make, it is also very important to make a large number of cotton paper roses in a short time.
5。 Put four pieces of paper together.
6。 Paste the edges of four pieces of paper with white latex respectively.
7。 At this time, cut bamboo or wood strips of appropriate size.
8。 Close and stick both ends with adhesive tape.
9。 Then, as shown in the figure, the iron wire is wound into a cross, which plays a fixed role and allows us to have a platform for placing the burning agent.
10。 First, glue it to the bottom of the paper bag of Kongming Lantern with white latex, and then fix it with iron wire.
1 1。 Make a small stage with the lid, and put some incendiary agents on it, such as solid alcohol or short candles.
12。 Finally, stick it on the wire with tape paper or glue gun.
13。 After lighting, you can easily fly the Kongming Lantern.
Kongming lanterns are also called sky lanterns, commonly known as wishing lanterns. It is an ancient handicraft of Han nationality, which was mostly used in military affairs in ancient times. Modern people put lanterns on Kongming lanterns as a blessing. The wishes of men, women and children to write blessings by hand symbolize the bumper harvest and happiness every year. Generally, it is released on major festivals such as Lantern Festival and Mid-Autumn Festival.
Legend has it that it was invented by Zhu Gekongming (Zhuge Liang) during the Three Kingdoms period. At that time, Zhu Gekongming was besieged by Sima Yi in Pingyang, unable to send troops out of the city for help. Kong Ming calculated the wind direction, made a floating paper lantern, tied with the message for help, and then escaped as expected, so later generations called this lantern Kong Ming Lantern. Another way of saying this is that this lantern looks like a hat worn by Zhu Gekongming, hence its name.
Lift-off procedure recommendations:
The making method of Kongming Lantern is simple, but it is greatly influenced by the venue and weather when it is launched. When the wind is strong, it is easy to blow the lamp body obliquely and burn it out. It's easy to get wet when it rains and can't be released, so it's best to throw it when there is no wind.
1。 First, turn on the lamp body and tie the control lines around and at the bottom.
2。 Fill it with fuel.
3。 After ignition, the air inlet should be as low as possible to reduce the loss of hot air, but not too low to avoid the flameout due to insufficient oxygen. At the same time, the surrounding control lines must be straightened.
4。 When the temperature of the hot gas in the lamp body is enough, slowly loosen the surrounding control lines to keep the lamp body rising steadily. The control line at the bottom must control the rising speed and height of the lamp body.
5。 After the sphere is launched, its height and direction can be linearly controlled, and it can also float freely, thus completing the launch.
When taking off with a light, tie a piece of coarse cloth or gold paper stained with kerosene or peanut oil in the middle of the bracket at the bottom, and light the fuel before flying. After the fire in the lamp burns for a while, it will produce hot air and the lanterns will expand. After flying, the whole lantern will soar in Ran Ran. If the weather is clear and the kerosene at the bottom burns out, the Kongming Lantern will automatically descend.
Note: Kongming Lantern must be released in windless weather and open places, otherwise it will not fly to the sky and may cause fire. You need 2-3 people to cooperate when flying, and it is strongly required to be accompanied by an adult. In addition, the cable can be tied to the bottom of Kongming Lantern, which can not only fly repeatedly, but also control the take-off height and range to avoid fire.