1, check the egg仔机各部件是否完整，木柄是否已固定好。

2, after confirming that there is no problem with the egg machine will be the egg machine power plugged in to open the egg machine switch, click on the left side of the button to set the temperature and will be adjusted to 170 ℃, at the same time will be set to the time of 10 minutes, the purpose of doing so is to let the egg machine preheat.

3, in the process of preheating the egg仔 machine we can adjust to the production of egg仔 egg batter, will be 2 beaten eggs and special egg batter in accordance with the 500g poured into the 400g of water, with a mixing stick to tell the mixer to the state of the particles, and then add 50g of shortening, and then with a sieve on the egg batter has been well sifted, sifted egg batter will be a few minutes of rest after sifting.

4, such as egg batter made, this is the egg仔 machine has also been preheated to complete, open the egg仔 machine will have been made egg batter such as egg batter will be spread all over the egg仔 machine after the mold will be closed to maintain the temperature of the preheating baked for 30 seconds, turn over the side to continue for 1 minute, and then turn over the side of the heat for 30 seconds. During this time, you can use a probe to poke holes to make sure the batter is cooked.

5, small fan plugged into the power supply, the baked eggs placed on the small fan for a number of minutes, so that the baked eggs will be crispy outside and tender.