2. Insert a USB flash drive into the uefi computer, and press the shortcut keys such as F 12 or F 1 1 or Esc continuously after startup. Different computers have different startup keys. In the pop-up startup item selection box, select the identified USB flash drive option. If there is a startup item with uefi, select the uefi item and enter to boot from UEFI.
3. Due to different production methods, some Chinese cabbage uefipe startup disks will directly enter the pe system, and some will display this main interface first. If this interface is displayed first, press the ↓ arrow key to select 02 and enter to run win8PEx64；;
4. After entering the Chinese cabbage pe system, if it was pre-installed with win8 or win 10, that is, guided by uefi, directly execute Step 7. If it was win7, it needs to be completely re-partitioned into GPT partition table, double-click the DG partition tool on the desktop, right-click the hard disk, and click Quick Partition;
5. Select GUID as the partition table type, that is, GPT partition, and then set the number of partitions and the size of the system disk. It is recommended that it be more than 50G, and the SSD needs to check the alignment partition to this sector, and the default is 2048 sectors, so confirm;
6. After that, the hard disk partition and formatting process will be performed, and the gpt partition table will have two additional partitions, ESP and MSR;
7. Then double-click to open the Chinese cabbage PE one-click loader, select win 10x64iso file for the GHOWIMISO image path, and then click the drop-down box, and the tool will automatically extract win 10.gho file and select win 10.gho file;
8. Then select the restore partition, and choose the installation location of win 10 system, usually drive C. The drive letter under pe may be displayed in disorder. It should be noted that if it is not drive C, it should be selected according to the volume label system or hard disk size, and click OK;
9. This dialog box pops up, check the options of restart and boot repair after completion, and click Yes to perform the next operation;
10, go to this interface, execute the process of installing win 10 to drive C, and wait for the progress bar to be completed, usually about 2-5 minutes;
1 1, after the operation is completed, you will be prompted that the computer is about to restart. The default is to restart automatically after 10 seconds, or click Yes to restart the computer immediately;
12. Pull out the USB flash drive at this time, and it will automatically enter this interface, and continue the installation of components, drivers, system configuration and activation of win 10;
13. The installation process takes 5- 10 minutes. After booting into the win 10 desktop, the win 10 system is installed.