Current location - Recipe Complete Network - Health preserving recipes - Electric pressure cooker common faults and maintenance
Electric pressure cooker common faults and maintenance

1, the mouth of the inner pot deformation

Solution: replace the inner pot

2, the inner pot cover, sealing ring, sealing fixed ring and other parts of the failure

Solution: repair of the inner pot cover, remove the sealing fixed ring hair peeling or replacement of the sealing fixed ring.

3, ball gasket rupture or size deviation

Solution: replace the ball gasket

4, exhaust caused by rice slurry or foreign matter clogging

Solution: regular cleaning of the ball gasket and the ball

5, the ball gasket sealing ring is broken or the ball deformation

Solution: replacement of the ball gasket sealing ring or ball

strong>Extended information;

Electric pressure cooker precautions;

1, in the heating process, never open the lid in the middle, lest the food burst out scalding. Do not remove the weight or pressure regulator before confirming the cooling, lest the sprayed food hurt people. The lid should be opened only after natural or forced cooling.

2, when using, first carefully check whether the exhaust hole is unobstructed, whether the hole under the safety valve seat is blocked by residual rice particles or other food residues. If the use of the process is blocked by food, the pot should be forced to cool down, clean air holes to continue to use, otherwise the use of food will be sprayed out scalding.

Also check whether the rubber sealing gasket is aging, because the rubber sealing ring after a period of time will be aging, aging rubber ring easy to make the pressure cooker leakage, for which you need to update in a timely manner.

3, the lid must be reclosed in place before cooking food, otherwise it will cause the lid to fly up accident.

4, the use of some people without authorization in the pressurized valve to increase the weight, in order to make the pressure inside the pot to increase, forcibly shorten the production time. Do not know the size of the pot pressure is a strict technical parameters, ignoring this scientific design, is the same as using their own lives to joke, will cause the pot burst the serious consequences of human injury, must not take this risk.

In addition, when in use, if the pot on the fusible metal piece (plug) once off, never allow other metal objects to plug instead, should be replaced with the same new pieces.