Gypsum line is also a good decoration material when we decorate our house. It is also relatively beautiful in decoration and can meet our decoration needs. However, we also need a comprehensive understanding when decorating and constructing plaster lines. This will help our house feel more comfortable. Below we will introduce to you how to make plaster lines for home decoration? This will also help us decorate.

1. How to make plaster lines for home decoration

1. For plaster line decoration, you must understand the selection and cleaning of plaster line molds before choosing high-quality ones. The mold is very important. The pattern of the mold should be clear, three-dimensional and smooth. Carefully clean the mold with mopping paste. Make sure the inside of the plaster line mold is clean and carefully clean the inside of the fine seams of the pattern. If the plaster line mold is severely deformed due to aging, it can be soaked in high-temperature water. Discomfort may cause permanent damage to the mold.

2. For plaster line decoration, fixing the plaster mold also requires us to treat it carefully. The mold must be clamped with strong clamps, and when clamping, attention must be paid to maintaining the value of the glass countertop or marble countertop. Level, otherwise when the plaster lines are demoulded, there will be gaps in the finished product that are often said to be "left on top". Choose a suitable spoon for mixing gypsum powder. The size of the spoon needs to be proportional to the width and thickness of the gypsum line. The wider and thicker the line, the more gypsum powder is needed, and the larger the spoon you need to use. Then sprinkle in gypsum powder.

3. For plaster line decoration, you need to know how to fill the gypsum slurry and evenly apply the prepared gypsum slurry into the plaster line mold until the gypsum slurry completely covers the entire front of the mold and the thickness reaches 5mm. Above, then add fiberglass or mesh, add a strong thin rope to one end, then cover it with a layer of gypsum slurry, and then use a special mold scraper to smooth it. We emphasize here that the thickness must meet the standard and do not cut corners as it may easily break or deform when demoulding.

2. What are the types of gypsum threads?

1. What are the types of gypsum threads? Fiber gypsum wire: Fiber gypsum wire is made of architectural gypsum as the main raw material to meet our decoration needs and is mixed with an appropriate amount of fiber reinforced materials. The flexural strength of this board is higher than that of paper gypsum wire and can be used for interior walls and partitions. Walls can also be used as an alternative to wood to make furniture.

2. There are various types of gypsum lines. Paper-faced gypsum line: Paper-faced gypsum line is a lightweight board made of gypsum slurry as a sandwich and paper as a cover on both sides. Paper plaster thread is light in texture, high in strength, fireproof, mothproof, and easy to process. Generally, plaster lines are used for interior walls, partition walls and suspended ceilings. Water-resistant plaster lines that have been treated with fire protection can be used on walls in rooms with high humidity. Such as linings for ceramic tiles and plastic-faced brick walls in bathrooms, kitchens, bathhouses, etc.

3. There are various types of gypsum lines. Gypsum hollow strips: Gypsum hollow strips are made of construction gypsum as the main raw material, giving us good decorative effects. A hollow board made by adding an appropriate amount of lightweight filler or fiber materials. This kind of board does not require paper and adhesive, and does not require keels when installed. It is used for interior walls and partition walls.

When decorating plaster lines, everyone still needs to understand it in detail, so that the effect of our decoration will be beautiful when the time comes.