Why is there water in the floor tiles on rainy days? Why is there water in the floor tiles on rainy days? Decorating the house is a great event in our life. Generally, when it is about to rain, the weather will be sultry. At this time, the ground on the first floor is very easy to regain moisture and water. Let's share why there is water in the floor tiles on rainy days. This description is too general, but according to the description of the problem, it can be divided into the following three situations: the wall bricks at home will fall out on rainy days. On rainy days, the floor tiles at home will fall out; On rainy days, there will be small drops of water on the surface of wall tiles and floor tiles at home. In the final analysis, when it rains, these three kinds of tiles will go out of the house because the external wall waterproof and storm drain are not done well, the ground waterproof is not done well, and the family has not done a good job in dealing with the humid weather returning from the south. As long as these positions are checked one by one and carefully handled, it can be guaranteed that no water will come out of the house in rainy days and the home life will return to normal. On rainy days, the solution of ceramic tiles leaving the house is to solve the problem of water leakage in different ways in different situations and different positions. Only in this way can the right medicine be applied to solve the problem completely. 1, exterior wall waterproofing and rainwater pipes are not completed. If it is because the external wall is not done well, when it rains, the rain will penetrate the external wall and enter the tile, and then the water will flow out from the surface of the tile. Then it is very common that tiles will flow out for this reason, especially those cases where the construction quality of external walls of houses is unqualified. As long as it rains, outdoor rainwater pipes will drain in a large number of concentrated places, which will make the tiles at home surface. Solution: When dealing with the situation that there is no water in the tiles in the house because the external wall is not finished in rainy days, the outdoor rainwater pipe and the external wall should be handled well, so as to completely solve the problem and ensure that this problem will not occur in the future. Specific operation: please ask the person who specializes in external wall treatment to check whether the rainwater pipe in the water outlet part of the wall is disconnected and whether the outdoor part of the residential building leaks. It is very simple to check, because after the rainwater pipe is disconnected and leaked, the part below the leakage point will change color, which is obvious. Therefore, first of all, the position where the rain water pipe is disconnected should be repaired to ensure that it will not leak again. After the rainwater pipe is repaired, the external wall insulation treatment and external wall waterproof treatment shall be done at the leaking wall position, so that the external wall part will not leak water and there will naturally be no problems indoors. Through this solution, when it rains, the tiles at home will not be short of water, and home life will return to normal. 2, the ground waterproof is done. For the house on the first floor, if there is no overhead floor and garage design below, the ground and wall bricks are easy to appear on the surface when it rains, and this situation can only be restored to the state of no water after a day or two of rain. The reason why this happens is that the basement of the house is in a relatively low-lying position, and rainwater accumulates in the low-lying place, and then the waterproofing is not done well, so that the tiles are out of water. Solution: It is very troublesome to solve the problem of tile leakage caused by water accumulation in low-lying areas of the house, because such a situation must be dealt with in a targeted manner before decoration. Now there are some ways to deal with the tiles after they are laid, which is more expensive to deal with. When solving the problem, it is necessary to waterproof the ground again, or raise the ground and make a hollow layer to deal with it. Specific operation: Dismantle the tiles with the floor and wall surface not less than 30cm, then level them with cement mortar, waterproof the leveled positions with waterproof cloth, finally resurface the walls and floor tiles, and finally use them with dehumidifier, so that there will be no water on the tile surface in rainy days, and there will be no moisture after using dehumidifier. If you don't want to dismantle the floor tiles, you can also raise them directly on the ground to make a hollow layer, which can also solve the problem of floor tiles coming out of water. When the floor of the hollow building rises, the bottom waterproof still needs to be done. It can be said that waterproof construction is very important. 3. If the house is located in a city in the south, and it is rainy in humid weather in the south, then the tiles in all parts of the house will be dewed, which can also be called tile water. This kind of situation will be encountered in wet weather in all cities in the south, but it won't happen again as long as it passes the wet weather. The solution needs to be carried out in a multi-energy way. Solution: If it rains again in the humid weather in the south, then it is necessary to make rational use of the window opening and closing, and at the same time cooperate with the dehumidifier, so as to solve the problem that the tiles can't get out in rainy days. Specific operation: when returning to the south in wet weather, in the weather without rain, only open the window for half an hour to breathe at noon every day, close the window at other times, and then dehumidify the room all day with a dehumidifier, so that there will be no water on the surface of the tile; If the weather returns to the south and it rains indoors, you only need to open the window a little in the morning, ventilate it for half an hour, then close the window all day, and at the same time, cooperate with the dehumidifier, the surface of the tile will not get water and keep dry. Why is there water in the floor tiles on rainy days? What is the reason for the water drops on the hot ceiling? 1 may be a seasonal factor, especially in southern cities, and this phenomenon will be more frequent in rainy season. Because it is rainy weather, the temperature is relatively high and the humidity will be very high. In this environment, water droplets will form on the ground, but when the weather is clear, this phenomenon will naturally disappear. There may be something wrong with the ground. When laying tiles, the soil will be laid underneath. However, if the soil on the floor mat forms moisture, it will make the tiles on the ground wet, resulting in the humidity of the whole room getting worse. This kind of problem is difficult to deal with. Another factor is that the ventilation effect of the room is not particularly good. There are problems of water leakage and poor drainage in the room, which will affect the tiles and cause moisture and water ingress. How to deal with the effluent of floor tiles? 1, air conditioner/dehumidifier dehumidifies. General household air conditioners have dehumidification function, but the method of adjusting indoor air humidity by air conditioners is slow, which will make people feel very cold indoors. If you are not satisfied with the dehumidification effect of the air conditioner, you can also buy a special dehumidifier, which can get quick results but consumes a lot of electricity. 2. Dehumidify the heater. The heater used for heating in winter can also alleviate the indoor humidity to a certain extent, but the effective radiation range of the heater is small, which can not achieve immediate dehumidification effect. 3, desiccant dehumidification. The most common desiccants are dehumidifiers and dehumidifiers. Many absorption boxes have various scents, such as lemon, lavender and sweet orange. It can make the air at home fresh and suitable for the living room. In the large space of daily life, such as rooms, toilets and kitchens. 4. Quicklime absorbs moisture. Fill a newspaper or a small cloth bag with a proper amount of quicklime, bundle it into several small bags, and put it in every damp corner to alleviate the damp situation. Quicklime is not moisture-proof when it is wet, and dried quicklime should be replaced again. How to keep the wooden floor clean 1 and the indoor humidity stable? The room with wooden floor should not be too dry, otherwise it is easy to destroy the structure of wood, but the humidity should not be too high, otherwise the floor is easy to swell, fluff and mold. 2. Keep the floor heating temperature balanced. When using floor heating, the room with wooden floor should keep the temperature balance, which can make the floor more conducive to maintenance and brighter and cleaner when cleaning. It can be maintained once every six months. 3. Put the mat on the furniture. Furniture that often moves indoors is equipped with foot pads, which can not only avoid damaging the floor when moving, but also eliminate the noise generated when moving, and you don't have to worry about scratching during daily maintenance. Why is there water in the floor tiles on rainy days? 1. Reasons for resurgence of floor tiles 1. The foundation of rural houses is deeply planted in the soil, and the moisture in the soil evaporates upward, making the floor tiles at home particularly wet. After a long time, small water droplets will appear on the floor tiles. 2. Indoor and outdoor air humidity is high, and the floor tiles can't absorb water and dry in time, which will lead to the resurgence of the ground. 3. If the circulating system is laid at home, the floor may recover its moisture. 4. The moisture-proof layer on the ground is not well done during the decoration, and the moisture-proof effect is poor, and the phenomenon of moisture regain on the ground may also occur. Second, how to deal with the resurgence of floor tiles 1, inspection situation If there is a resurgence of floor tiles at home, first check whether there are obvious cracks on the ground, because water vapor will evaporate upward along the cracks. In addition, knock on the ground to check whether there is empty drum. 2. Handling cracks If the cracks are not too big, you can completely fill them yourself. Of course, the ground should be kept dry during construction. If it is a big crack or a serious empty drum, you need to knock off the floor tiles on the surface and find professionals to repair them. 3. After the cracks and hollows are treated with moistureproof layer, waterproof coating can be painted on their surfaces, especially in the corner construction, which must be completely covered. 4. Make a new surface course. If the ground moisture regain is serious, you can also make a new surface course and choose a material with better waterproof performance. At the same time, in sunny weather, more ventilation is needed to disperse indoor moisture. Third, how to prevent floor tiles from regaining moisture 1, and choose tiles with low water absorption. When choosing to buy tiles, choose tiles with low water absorption, so that even if there is water on the ground, it will not penetrate. This kind of tile has good waterproof performance, which avoids the moisture regain of the ground to some extent. 2, reduce the window opening in rainy days If it rains outside, avoid opening the window and reduce the entry of water. If the room is humid, you can use a dryer or put some quicklime on the ground to absorb the moisture in the air. 3. Dehumidification In case of continuous rainy days, you can turn on the dehumidifier at home to remove the moisture in the air. Of course, when it is sunny outside, you should open more windows for ventilation.