Current location - Recipe Complete Network - Dietary recipes - Cutting method of gas stove sticker
Cutting method of gas stove sticker

The gas stove sticker is a very convenient decoration method, which can beautify the space in the family. Although the method of cutting gas stove stickers is not difficult, some skills need to be paid attention to. The following are some common cutting methods of gas stove stickers.

1. Measure the size of the gas stove

Before cutting, you need to measure the size of the gas stove first. It should be noted that the diameter of each burner disc needs to be measured to ensure the correct size of the sticker. In addition, it is necessary to measure the size of the whole gas stove so as to leave an appropriate edge space when cutting.

2. Use paper tape as a template

Before cutting from the gas stove sticker, you can use a piece of white paper as a template. Put the white paper on the gas stove, and then use a paper tape to outline the shape to be cut on the white paper. Once finished, you can remove the paper tape from the white paper and then use a pair of scissors to cut out the sticker.

3. prepare a colored pen

when cutting the gas stove sticker, it is recommended to prepare a colored pen. When sticking the paper on the white paper, mark the shape to be cut on the white paper with a colored pen. The position of the marker can provide better guidance when the scissors slide around the shape to be cut when the paper strip is cut.

4. Mark the cut line

When cutting the sticker from the gas stove sticker with scissors, it is recommended to mark a cut line around the line with a colored pen or pencil. This ensures that the specified shape is followed when cutting. When marking, you should be careful not to be inside the cut shape, because this may leave scratches or pollute the material, thus affecting the appearance of the sticker.

The above are some common cutting methods for gas stove stickers. It should be noted that when doing these operations, it is recommended to test whether the shear line or template is correct first. If you have any questions, please don't hesitate to consult a professional to ensure that you get the best results.