Different types of exhaust fan installation

1, ceiling exhaust fan installation

If the ceiling type of aluminum ceiling, generally equipped with matching metal fasteners with the ceiling keel, the installation is very convenient; and if it is a wooden ceiling, as long as the exhaust pipe is connected to the wood screws to tighten the exhaust fan panel on the line.

2, wall-mounted exhaust fan installation

When the exhaust fan is installed on the wall, to measure the size of the exhaust fan profile and the exact location of the screw holes installed, and then use a steel chisel or portable impact drills in the wall chiseled out the mounting holes. Then in the hole buried wood block (or wood pillow), embedded with mortar, such as mortar embedded can be installed after the exhaust fan.

3, window exhaust fan installation

When the exhaust fan is to be installed in the window, the general process is to remove a piece of glass, use a drill to drill holes in the window frame and then drilling threads, and screws. If the window frame is larger than the exhaust fan, you can pre-prepare a piece of white iron screwed on, and then the exhaust fan is fixed on the iron, the iron can be painted, the fixed way to screw or rivets.

Exhaust fan installation needs to know

Exhaust fan installation should be carefully checked before the fan is intact, whether the fastener bolts are loose or fall off, the impeller has no collision with the wind cover. Carefully check the fan blade or louver in the transportation process has no deformation damage.

Exhaust fan installation needs to be smooth, fan installation, pay attention to the horizontal position of the fan, not tilt phenomenon.

After the fan installation is completed, the sealing around it should be checked. If there is a gap, use sunshine board or glass glue to seal.