1. Seal the gap between the foam box lid and the box with a wide tape around a few more times, as strong as possible, no leakage of water and soil.
2. Use a cross gong wire knife heated in the bottom of the box and box lid on both sides of the iron a few rows of water holes (like the side of the iron holes can also be)
3. In the box need to cut the part of the pen around the periphery of the circle line, and then use a hobby knife or knife heated according to the line to cut the box can be.
4. If the box is deep enough, the center can also be cut down a frame, which can be used to cushion the box below the two divided to solve the problem of ventilation of the box.
So a box can be easily turned into two boxes, the same number of boxes and soil planting scale can be doubled, bringing the benefits of soil saving, box saving, lightweight, fuller light, and because of the division of the two boxes of the same height and size, from the point of view of the aesthetics does not look cluttered.
Suggestions:
Height of 25 ~ 30 centimeters of the box cut for: 2 equal height box + 1 frame, height of 20 ~ 25 centimeters of the box cut for: 2 equal height box, 15 ~ 20 centimeters of the box cut for: 1 box + 1 frame + 1 seedling tray (using the box lid), less than 15 centimeters of the box is not cut, but the lid can be used to do The box is smaller than 15cm, but the lid can be used to make a seedling tray.
Note:
1. Gong wire knife and knife heating time of tens of seconds, the foam box is easy to melt, it is best to use a small piece of foam cutting to try the temperature, feel and then cut in the box, much easier than imagined Oh.
2. When cutting the box, it is best to take a piece of cardboard to do backing, cutting line will be very straight. Cutting line action light and fast lest the foam dissolve too much, but this only affects the appearance of the point does not affect the use.
3. To foam box time with a long time, in the foam box around the perimeter or the bottom of a few wide tape, pay attention to avoid the water hole can be.
4.