Muffin shoes laces can refer to the following several tying methods:

One, cross cross knot

1, one end in the inner knot, the other end in accordance with the order of the holes;

2, jump a hole to wear;

3, in accordance with the same method tied down;

4, repeated after the rest of the laces stuffed to the inner knot processing;

5, purple laces are also tied down;

5, purple laces, the same way to tie the shoes. method to tie down;

4, after repeated, the remaining laces stuffed to the inner knot processing;

5, purple laces also according to the same method, in accordance with the order of holes;

6, from the bottom in, and then from the top out;

7, according to the color of the shoes to choose the harmonic laces;

8, the excess laces in the inside of knotting processing.

Two, trapezoidal knot

1, adjust the length of both ends of the shoelace, pull out the shoelace from the inside to the outside;

2, pull out the shoelace, from the outside to the inside of the shoes, into the second hole;

3, the left side of the lace from the right side of the two holes in between the lace out from under the right side of the same;

4, repeated operations;

4

5, pay attention to the direction of the two ends of the cross laces;

6, excess laces tucked inside the shoe knot processing;

7, the completion of the trapezoidal knot.

Three, twist knot

1, two laces in the knot inside after wearing out;

2, two laces cross after the second hole through;

3, this time in order to try to center the intersection point, pulling the laces tight;

4, so that the intersection point of the process of center Produce a twist look;

5, twist knot enlarged picture;

6, leaving the last hole;

7, the last with the X Kaiming to deal with, so that it is more convenient to put on and take off;

8, the rest of the shoelace on the inside of the shoe together with the knot processing.

Four, double X knot

1, from the second hole, from the outside to the inside through the laces;

2, with the X knot method of the first white laces;

3, white X knot look;

4, the end of the tucked to the inside and then tied to deal with the knot;

5, as shown. Blue shoelace through the first hole, X knot, through the white shoelace cross;

6, the blue shoelace end knot processing;

7, the rest of the line is relatively long, you can make a ring;

8, after a few rounds through the ring.

Five, double straight knot

1, yellow laces leave a length from the left side of the hole out from the right side of the hole in;

2, in accordance with the direction of the dotted line through the laces;

3, adjust the laces, so that it maintains the zigzag shape do not roll up;

4, the excess part of the tucked into the

5, also leave a section of white shoelace on the inner side, and then tie a knot with the yellow shoelace on the inner side;

6, thread the shoelace in the direction of the dotted line;

7, adjust the white shoelace so that it is on the top of the yellow shoelace;

8, tie a knot with the excess part on the inner side of the shoe and the yellow shoelace together.

Six, slash knot

1, through the first hole and then tie a single knot on the inside, the other end from the inside to the outside through the third hole on the left side;

2, the laces and then from the right side of the second hole through;

3, with the blue laces to complete the look of slash knot;

4, with the white The white shoelace is used in the opposite direction to tie the diagonal knot again;

5. The method is the same as that of the blue shoelace;

6. The blue and white shoelace finally comes out from the hole of the tongue part;

7. The look of wearing out from the tongue part;

8. The tie is a little loose and more beautiful.

Seven, the internal X knot

1, the two ends of something to keep the same, each end of the second hole from the hole;

2, from (1) holes into the (2) holes, and then out of the (3) holes;

3, repeated (1) (2) (3) steps (shown in the figure);

4, something needs to be lengthy, and then out from the tongue part;

8, a little looser to look better. p>4, the length of something needs to be 90-95CM, the last remaining length as shown in the picture;

5, in the inner knot processing;

6, the finished style.