Gypsum line is currently a decoration material that many people like, but we know that after many materials have been used for a long time, they want to dismantle it. The editor will introduce it to you below. How to remove the glued plaster line.
The plaster lines on the wall are generally not glued to the wall. Most of them are fixed to the wall with expansion screws, and then gypsum powder is applied on the gap between the plaster line and the wall. See There will be no gap between it and the wall, and it will feel like it is glued together. For disassembly, there are two ways:
1. Destructive disassembly. If you don’t want to reuse the plaster line, you can use destructive disassembly. Take a small hammer and a screwdriver, use the screwdriver to lift it along the edge, and use Use a small hammer to hit the back of the screwdriver, and a gap will appear in the plaster line. Once there is a gap, just pry it off hard. The plaster line will be easily broken.
2. If you want to reuse the removed plaster line, you should dismantle it slowly. First, use the wallpaper knife to cut the plaster line and the wall along the edge where the plaster line contacts the wall. After filling up the gypsum powder, lightly scratch it. When there is a gap between the gypsum line and the wall, you can find the expansion screws that were originally fixed. Then dig a little bit where the screws are on the surface of the gypsum line, and you can see Go to the screw cap, take a screwdriver (called a screwdriver in some places) and remove the fixing screw. There are about 5-6 specified screws in a plaster line. After removing them all, the plaster line will come off. Be careful not to break it, and then Can be used again.
How to install gypsum line
1. Gypsum line is a kind of gypsum product. It is generally used as a corner line in interior decoration and surrounds the edge of the roof. It can be used with various Plant patterns through which water pipes can pass. Practical and beautiful, practical and beautiful, low in price, it has the functions of fire prevention, moisture proof, heat preservation, sound insulation and heat insulation, and can have a luxurious decorative effect.
2. Before installing the corner plaster line, check whether the wall is clean. Avoid uneven plaster lines when installing them.
3. Whether the surface patterns are connected together when the plaster lines are connected. Some walls are uneven, but the top corners must be adjusted neatly when installing plaster. This plays the role of decorating the plaster line.
4. Whether the surface of the plaster line is smooth. Check whether there is quick-adhesive powder on the surface of the plaster line. If so, use a brush dipped in clean water to clean the surface of the plaster line before it is completely dry.
5. Whether there are gaps between the gypsum lines at the junctions of different turning surfaces. The top corner plaster lines appear to be integrated throughout the space, so the turning surfaces must be neatly repaired, and there should be no gaps at the connection between the plaster lines and the wall. This is not only unsightly, but also poses certain safety risks.
6. After the putty is dry, repair and polish the plaster line mold. This will make it more beautiful.
Summary: This is the introduction on how to remove the glued plaster wire. The removal should also be determined according to the actual situation. Only in this way can we find the appropriate method to remove it. I hope the above introduction will be helpful to everyone.