Current location - Recipe Complete Network - Pregnant women's recipes - Nepal electric pressure cooker fault codes and solutions
Nepal electric pressure cooker fault codes and solutions

Introduction: there are many friends will encounter such a situation? When you are ready to use the electric pressure cooker see a code displayed on it. What does this code mean? In fact, as long as you read this code will know that this represents the electric pressure cooker what kind of problem. Today I will tell you what kind of Nepal electric pressure cooker fault code means.

Possible causes

1, the upper cover thermistor open or short circuit (normal 100K/25 degrees Celsius)

2, close the cover is not in place or the excitement of the switch and its connecting line failure

Solution <

1, replace the upper cover thermistor

2, normal close the cover, check the agitation switch and its connecting line is normal, normal box cover after the microswitch contacts can be closed effectively.

Nepal electric pressure cooker fault code E1

Possible causes

1, no pot alarm

2, the temperature sensing cup failure (thermistor open or short circuit)

solution

1, check whether the pot is dropped (the wrong inner pot)

2, replace the thermistor (the wrong inner pot)

2, the temperature sensing cup failure

The temperature sensing cup is not the best. p>

2, replace the temperature sensing cup components

Nepal electric pressure cooker fault code E2

Possible causes

1, empty pot dry burning

2, high temperature alarm

Solution

1, pot water restart

2, check the bottom of the pot to see if the pot

2, the bottom of the pot to see if it's not a good idea. > 2, check the bottom of the pot whether there is oil; foreign objects

Thermistor failure

Nepal electric pressure cooker fault code E3

Possible causes

1, the beginning of the detection of the upper pressure (at this time should not be on the pressure)

2, should be on the pressure and did not go on the pressure (by detecting the temperature)

3, the stop open lever cover fell down and the temperature is not the same.

Solution

1, Replace the inner lid or stop valve

2, Replace the reed switch or connect other wires

Above these four is the fault code of the Nepal electric pressure cooker, I'll give you a detailed explanation of the causes of this four codes. I will give you a detailed account of what causes these four codes, and how to solve the problem when faced with these causes. I hope it can help you to solve the problems of Nepal electric pressure cooker.