When it comes to all-layer bottom-flow fishing, we can't help but talk about what is called "bottom flow". In a certain area, the most important current is called the mainstream, also known as the mainstream. Its characteristics are: it represents the main flow direction of the tide, with fast flow speed and relatively fixed direction, mainly referring to the running water formed during the high tide or low tide. Generally there is only one main current in a certain area. Compared with the current in a relatively small area, the current with a slower speed than the mainstream is called a tributary, which is characterized by the impact and swell of the current under the action of coastal topography, rock fluctuation and submerged reef. Different geographical locations may have different tributaries, and these tributaries are also good places for our pumice fishing. But what I'm talking to you here today is not this tributary problem, but a full swimming fishing method in this stream.

Friends who have fished marine fish will know that the most important thing in fishing marine fish is to catch up with the tide. A good tide will harvest a lot of fish, and a bad tide will get twice the result with half the effort. Fishermen slowly concluded through the previous fishing process that every time the tide recedes for 2 minutes, rises for 8 minutes, and the fluctuation is halved, it is a good time to catch Chinese fish; There are no fish to catch when the tide rises or reaches the bottom. This also shows a truth: fish will come and go by the current, especially some fast-swimming fish, which often appear in the current and are large in size.

Now that we know that the current is fast, how to fish and how to choose the fishing method? Friends who have fished by boat will know that sometimes we choose a 500-gram lead-drop fishing group to fish in the running water, which will tilt. In this case, it is impossible for us to catch fish with pumice on the shore, and it is difficult for the bait to get to the bottom, let alone let it go in this stream? The far field may be deep, and the bait cannot be guaranteed to be sent to the bottom of the rock, so the most suitable fishing method is full-layer fishing.

Since it is a current and a current, we should first consider choosing a heavy fishing group to ensure that the fishing group will not be washed up by the running water. According to the speed of running water, generally, the floating waves of 5B, 1, 1.5, 2.0 can be adopted, and the larger ones are better, even the large landmarks are selected, which has good riding performance. Just like we fly kites, big kites can fly farther and higher. If the current is deep, the middle fishing point may be far away, and sometimes it may exceed 100 m, so that the large-volume buoy can really exert its current-riding ability, pull the 100 m fishing line to keep the main line straight, and effectively transmit the fish information to the fishing rod.

Fishermen need to constantly sum up the skills of line control and keep the main line in a straight line to prevent the bait from being washed up. Furthermore, the choice of water is particularly important. Generally speaking, it is better to choose to fall into the water quickly. It is best to clip more than two lead bites on the sub-line, and the lower lead bite should be as close as possible to the bait (30 cm ~ 50 cm). Keep the fishing group straight, and ensure that the parting line is consistent with the settlement in the water. The water is too heavy and the bait is on it. The sub-line is too heavy, the floating state is not natural enough, and the fish yield will be greatly reduced. Therefore, the size of biting lead must be explored repeatedly and adjusted to the best state-to ensure that the sub-line is consistent with the settlement in the water.

Then what is the whole swimming and sinking fishing method? Simply put, it is the combination of full swimming fishing and negative buoyancy fishing. For example, in a fishing ground with a water depth of 30 meters, we can install the neps at a distance of 0/0 meter from the hook/kloc, and then install them in the big water (the weight in the water is greater than the buoyancy of the buoy). In the process of sinking, the front section of this fishing group is full-layer fishing, which is equivalent to one third of the whole fishing shed. When the buoy reaches the nep, because the weight in the water is greater than the buoyancy of the buoy, it begins to become a sinking fishing method, which is equivalent to the whole fishing shed. This fishing method is extremely effective in attacking the deep field of current.

Bait is also very important when using this fishing method. You must choose a large proportion of powder, concentrate it near the head of the stream, master the rhythm, and try to keep the fish in one fishing spot: the fishing rod is better than No.3, and the fish wheel is better to use the ordinary 4000 type, unloading, without hand brake, winding more than 200 meters of fishing line, the main line No.3 ~ 5, and the auxiliary line No.3 ~ 5.