This shows that you cherish your own wooden floor, so you will have such a reaction.

How to maintain the wooden floor?

More and more families give up traditional tile floor decoration and choose more comfortable solid wood floor in floor decoration. Then the question comes. When you choose solid wood floor, how can you effectively maintain it to prolong its life? Today, Xiao Jiu briefly summarizes the maintenance skills:

1, waterproof. If you accidentally spill water on the solid wood floor, even a little, you should wipe it clean with a soft rag in time and keep it dry, so as not to promote luster, or even cause warping, cracking and mildew.

2. Fire prevention. Don't throw unlit cigarette butts, matchsticks and other items with seedlings on the ground at will, and don't wipe the dust and dirt on the ground with gasoline, so as to avoid static electricity after friction, which may cause a fire.

3. Damage prevention. Don't wear shoes with nails to walk on the solid wood floor. Some rough, heavy and hard items can't be placed directly on the solid wood floor to prevent scratching. If this happens, it should be repaired in time.

4. Anti-fouling. If it is the general dirt left by water-soluble substances, you can wipe off the floating dust first, and then wipe it with a soft rag dipped in thicker tea. For cleaning agents that do not understand the chemical properties, they should not be used at will, so as not to cause unnecessary chemical reactions and damage to the floor.

5. Wax once every once in a while, and the time interval depends on the finish of the floor paint. The method is to clean the floor with a semi-dry rag and wax it. Apply it evenly on the floor surface and make it "soaked". When it is slightly dry, wipe it back and forth on the floor with a soft cloth until it is smooth and bright.

6. After three to five years of use, you can repaint the floor with the same paint as the original one. Remember to do a good job of dust removal before painting, and pay attention to the fact that you should use a thinner water mill sandpaper, dip it in a little warm water, and gently polish the floor surface to remove the residual oil on it, and then wipe it clean with a clean rag, so that you can paint it.