2. The thermostat is located in front of the product, and the temperature can be set by rotating the thermostat;
3. Turn on the power supply, the power indicator lights up, and rotate the thermostat clockwise. At this time, the green indicator lights up and the heating pipe starts to work. When the temperature rises to the required temperature, the thermostat can automatically cut off the power supply, at the same time, the green indicator light goes out and the heating pipe stops working. When the temperature of the heating pipe drops slightly, the thermostat automatically turns on the power supply to resume heating, and so on, so as to keep the temperature constant within the set range.
4, such as in the process of use, abnormal phenomenon, must immediately stop using, after inspection and troubleshooting, can continue to use.
1. When cleaning, cut off the power first to prevent accidents.
2. After every day's work, you can clean the furnace surface with a non-corrosive cleaner. When cleaning the control switches and instruments of the furnace body, dry towels should be used, and direct washing with water is strictly prohibited, otherwise the electrical performance of the furnace will be affected.
3. If it is not used for a long time, the furnace body should be packed and stored.