1, prepare a rectangular piece of paper and fold the short side.

2. Fold left and right after folding.

3. The left side is pushed down from the middle.

4, and then fold it over, the right side is also the same folding method.

5. Fold the left and right sides to the middle.

6. The upper edge is folded down, and the two corners are folded inward and fixed.

7. Open it from the middle, and a storage box will be folded. ?

Other methods:

Method 1:

Fold the prepared paper in half on both sides, open the paper and fold it again, open and fold a triangle, and then fold the triangle again. Open and fold a small triangle, and fold it on all sides.

Fold the triangle on one side, then turn it out. When turning the other side, fold the line below the picture, level the triangles on both sides, and then fold the two sides of the box. Fold the corner of the box again. When folding paper, the thread must be compacted.

Method 2:

Firstly, prepare A4-sized paper, which can be made of ordinary A4 paper, or cut into A4-sized paper with paper, so as to facilitate the subsequent production. Start with the side of the paper that has no pattern. First, the short side of the paper is folded in half, and then the rectangular structure is obtained.

Then, on the basis of folding in half in the previous step to form a rectangle, fold in half again. After folding in half, restore the previous operation steps, leaving creases. Then fold the crease formed by folding the left and right bottom corners of the origami model to the middle. Then fold the upper surface of the paper at the top corner of the origami model to the crease in the middle.

After the completion, you can see the color on the back, and then fold the left trapezoid structure of the origami model to the right. After completion, you get the style as shown in the figure. Then restore, and turn the rectangular structure on the right to the left. Then the upper part of the origami model is folded down, and the crease has been marked in the origami model.

After the completion, the color structure inside has all been presented. Open the pocket formed by folding by hand, put the structure shown in the circle into the origami box, then fold and insert the triangular structure on the right side of the origami model to the left, and after insertion and fixation, there will be a triangular structure protruding outward on the other side.

Cut off a small part of its triangle with scissors, so that a very beautiful and simple hand-made origami storage box can be easily made.