Current location - Recipe Complete Network - Pregnant women's recipes - What to do when the computer screws are unscrewed?
What to do when the computer screws are unscrewed?
1If you have an electric grinder in your hand, you can use a grinding wheel to cut a groove in the head of the nut so that you can easily unscrew it with a screwdriver.

2, depending on the material of the screws, you can solder a screw on the head of the nut through the soldering iron + tin wire (soldering can not try glue, but be careful not to stick the nut and notebook plastic frame), and then use a screwdriver or pliers can be unscrewed.

3, the drill for the right size drill bit, directly to the screw drill off (pay attention to the drill bit is not too big or too small, too small to achieve the effect, too big will be the following screw hole threads drilled, and be sure to ensure that the vertical under the drill).

4, if the nut protrudes more, you can try to use the sharp-nosed pliers to clamp and unscrew directly.

5, hands-on ability is not strong, it is recommended to directly seek help from the computer aftermarket and other professionals to operate.