Step 1, grab the hair and put the hairpin in the middle.
Step 2, wrap your hair around your hair twice.
Step 3, change the hairpin and curled hair from the original 45 degrees down to 180 degrees.
Step 4, use a hairpin to pick out a pinch of hair from the hair above (as a fixation). Step 5, pull a pinch from the outermost part of the hair that has been coiled below.
Step 6, turn the hair clasp to 90 degrees and pass under the hair pulled outside. This step requires a little skill, just practice it a few times.
Question 2: How to tie the ball head with long curly hair 1 Tie up all the hair. The amount of hair left on both sides and the height of the tie-up depend on personal preference. It is recommended that the amount of hair on both sides should not be too much and the tie-up position should be high. Only in this way can it be Japanese!
Step 2: Tie the ball head with a three-dimensional hair ring, and tie the ponytail loosely on the top of the head twice, so that the root can stand up slightly.
Step 3 of the method of tying the ball head: Tighten the hair, so that the effect will be more stereoscopic and will not lie on your head softly.
Step 4 of the knotting method of the meatball head is to roughen the hairstyle. If the hair is straight, it is best to separate the hair and roughen it first; There is no need to roll, it is divided into two parts, and the key point is to hold the hand at the end of the hair.
The effect of step 5 of the ball head binding method is basically formed in this way.
Step 6 of the knotting method of the meatball head is fixed with a rubber band, and no hair accessories are needed here.
Step 7 of the knotting method of the meatball head: Adjust the loosening slightly, and it will be OK to see the size of the meatball that you like.
Step 8 of the method of tying the ball head Many hair layers need to be fixed with U-shaped clips or black clips. If you are not skilled, you need to fix them. Even if the ball is not good-looking, you can adjust it with clips to look good.
Step 9 of the method of tying the ball head Choose a hairy ball or a cute hair accessory you like.
The tying step of the meatball head 10 is fixed on the meatball, and the clip can be tied up a little with hair accessories, which can play the role of fixing the clip.
Question 3: How to tie the ball head with long hair? The comprehensive long hair ball head tying method illustrates how to comb the ball head. In fact, the ball head is very simple to comb. There are only two tricks, one is to tie your hair high, and the other is to comb your hair backwards and comb it loose. They are also buns. If you are not careful, you will tie the cute meatball head into a dignified head. The key is that the bun position of the meatball head should be high (close to the top of the head), and the meatball bun itself should have a loose air sense. Don't tie it too solidly and neatly, otherwise it will be too old-fashioned. Step 1 Comb all the hair into a high ponytail, so long as the hair on the top and below is gently combed, keeping a loose and round arc. Step 2 Divide the ponytail into two bundles and tie the hair in a single knot. Step 3 people with long hair can tie a single knot again, and don't have to pull their hair too tightly when tying the knot. Step 4 Turn the finished hair forward and fix it on your head with a hairpin to make a bun. Step5 scrape the hair scattered from the bun with a comb, and complete the fluffy and lovely modeling ball head.
Question 4: How to tie Korean meatballs with long hair 1. Comb your hair and adjust the bulkiness. Because the ball head design of medium and long hair is small and simple, you don't have to pay too much attention to the bulkiness of curly hair.
2. Put all the hair together to form a ponytail.
3. Comb your hair by hand to make the hair on your head fluffy and look more natural. Then tie it into a ponytail with a rubber band. 4. Adjust the fluffy degree of the hair properly after tying the middle and long hair into a ponytail. In this way, the front of the hairstyle without bangs is natural and unobtrusive. How to tie Korean meatballs with long hair?
5. Scramble the ponytail slightly. Save it for the later dish.
6. Wind the ponytail clockwise into a ball shape. Adjust appropriately.
7. Shape with a rubber band and then adjust. How to tie Korean meatballs with long hair!
8. The ball head is basically shaped, and finally the position is adjusted with a word clip.
9. In order to prevent the "flower bud" from loosening and slipping, fix the word clip from the top of the hair.
10. Make the hair decorated on both sides curl properly.
The medium and long hair flower heads are completed.
Question 5: Can my long straight curly hair tie the ball head? Can the hair that is too long and a little curly still be tied with ordinary medium and long hair? forehead
Question 6: How to tie the ball head with long hair is simple and beautiful 1: comb the long hair first. This shoulder-length hairstyle, after the hair is washed, the upper part of the hair is tied to the top of the head. The higher the attention, the better. If the ball head is tied too low, it will look tacky and ugly.
2. Tie your hair into a towering ponytail. The separated two bundles of hair are tied up with small hair bands, and MM should pay attention to it. At this time, the tied position needs to be higher, which will look better.
3: Twist the hair tail into a braid.
4. Continue to twist the braids.
5: Twist the braid into a ball head.
6: Continue to twist the ball head.
7: Take out the U-shaped hairpin to fix the ball head.
8: finally adjust the hairpin.
Question 7: How to tie the ball head with medium and long hair. Illustrated Step 1 Step: Stick a high ponytail with a rubber band first, which I like personally, but not too low. If it is too low, the Taoist head will not look like it.
Step 2: Pull up the just-tied ponytail and comb it backwards from the tail to the root with a pointed tail comb. You can divide the ponytail into several parts and comb it backwards respectively. The purpose of back combing is to increase the volume of hair and make that bud look bigger. The tying method of the flower head: The purpose of reverse combing is to increase the volume of hair.
Step 3: Divide the ponytail that has just been combed backwards into two parts evenly, and tie it like a twisted twist: don't use too much force when crossing.
Step 4: Roll up the twisted hair disc and fix it with rubber bands.
The last step: fix and adjust the shape with a small black clip.
Question 8: How to tie the ball head with long hair? The simplest and freshest way to tie the ball head is illustrated: 1. Comb your hair into a high ponytail first, and it will look good if you are taller. Remember to comb your head back when you comb the ponytail, and don't bow your head, because when you look up, you will find that your hair will be loose after the head is combed, and it will fall off at the end of the day.
2. If the permed hair is compared with Mao Mao's MM, it can be directly operated. If it is straight hair or MM with smooth hair, it is necessary to roughen the hair first (you can scrape it with a comb). We pressed the ponytail down like a flower.
3. Now, let's divide the pressed head (I think it depends on the amount of my hair, and I usually divide it into 3-4 parts when I have more hair). If the MM with less hair can be divided into several parts, it will be fuller and more beautiful.) This time is the key! ! Pick up a piece of hair and roll it inside to form a small semicircle. Fix it with a clip, and fasten it tightly.
4. Then do this for each copy, roll it inside and fix it with a clip. At this time, it has been shaped and pulled ~ ~ It's very simple, right?
5. Then we adjust it so that the gap between each copy is slightly smaller. Finally, I pulled out some small broken hair from the top, which felt a little messy! (If you still feel that the MM is not fixed enough, you can spray some styling DD, because my hair is Mao Mao, so it's no problem not to spray it! Plus a headdress that I like, Dagong is successful! ! ＾＾
Question 9: How to make a good-looking meatball head 1. Comb the hair and adjust the bulkiness. Because the ball head design of medium and long hair is small and simple, you don't have to pay too much attention to the bulkiness of curly hair.
2. Put all the hair together to form a ponytail.
3. Comb your hair by hand to make the hair on your head fluffy and look more natural. Then tie it into a ponytail with a rubber band. 4. Adjust the fluffy degree of the hair properly after tying the middle and long hair into a ponytail. In this way, the front of the hairstyle without bangs is natural and unobtrusive. How to tie Korean meatballs with long hair?
5. Scramble the ponytail slightly. Save it for the later dish.
6. Wind the ponytail clockwise into a ball shape. Adjust appropriately.
7. Shape with a rubber band and then adjust. How to tie Korean meatballs with long hair!
8. The ball head is basically shaped, and finally the position is adjusted with a word clip.
9. In order to prevent the "flower bud" from loosening and slipping, fix the word clip from the top of the hair.
10. Make the hair decorated on both sides curl properly.
The medium and long hair flower heads are completed.
Question 10: How to tie the ball head with more hair than long hair? Before tying the hair, comb the medium and long straight hair smoothly to facilitate styling.
Tie all your hair by hand first, and be careful not to use a comb, otherwise it will look very rigid.
When finished, tie a tall ponytail with a black rubber band, and gently pull out the lower hair with your hands.
Then lift the ponytail and twist it clockwise to form a ball shape. After twisting, fix it around with a black clip and adjust the shape of the ball head.
Girls with less hair will have smaller balls, and if they want to be bigger, they should prepare a wig with balls. Then put the prepared wig on the small ball head, tighten it and fix it, and hide the elastic band in the contract.
Just fix it with a black clip, and a Korean meatball head will be finished.