Instrument introduction: Halogen heating rapid moisture analyzer is a new type of rapid moisture detection instrument. The ring-shaped halogen lamp ensures uniform heating of the sample, easy operation and accurate measurement. While the moisture meter measures the weight of the sample, the instrument uses a ring-tube halogen heating method to quickly dry the sample. During the drying process, the moisture meter continuously measures and instantly displays the % moisture content lost by the sample. After the drying process is completed, the final measured moisture content The content value is locked for display. Compared with the international oven heating method, halogen heating can dry the sample evenly and quickly at high temperature, and the sample surface is not easily damaged. Its detection results are in good consistency with the national standard oven method, are replaceable, and the detection efficiency is much higher. in the oven method. Generally, samples can be measured in just a few minutes.

The instrument is easy to operate and the test is accurate. The display part uses a red digital tube, and the indication value is clearly visible. It can display the moisture value, the initial value of the sample, the final value, the measurement time, the initial value of the temperature, and the final value. and other data, and has the function of connecting with computers and printers.

This moisture meter can be widely used in all industries that need to quickly measure moisture, such as medicine, grain, feed, seeds, rapeseed, dehydrated vegetables, tobacco, chemical industry, tea, food, meat and textiles. In laboratories and production processes in agriculture, forestry, papermaking, rubber, plastics, textile and other industries. 1. Small size and light weight

2. Fast and accurate detection

3. Simple operation and accurate testing

4. The display part adopts red digital Tube display

5. Wide range of uses

6. With the function of connecting to computers and printers 1. Weighing range: 0-90g

★★Debugable and tested The space is 3cm, 5cm, 10cm 2. Moisture measurement range: 0.01-100% 3. Minimum weighing reading: 0.001g

★★JK weighing system sensor 4. Sample mass: 0.5-90g 5. Heating temperature range: starting -205℃

★★Heating method: strain-type mixed gas heater

★★Fine-tuned automatic compensation temperature up to 15℃ 6. Moisture content readability : 0.01% 7. Display 7 parameters:

★★Moisture value, sample initial value, sample final value, measurement time, temperature initial value, final value, constant weight value

★★Red digital tube independent display mode 8. Dual communication interface: RS232 (printer)

9. Dimensions: 380×205×325(mm) 10. Power supply: 220V±10% 11. Frequency: 50Hz±1Hz　12. Net weight: 3.7Kg