Firecracker painting method is as follows:

1, the first step in painting colorful firecrackers, you can first firecracker fuse in the burning state when the appearance of the drawing out, drawing out of the start is also relatively easy to draw a curved rope, and then draw an irregular star and some small dots.

2, then the main body of the firecracker drawing out, you can draw a little curved, you can also draw a straight straight, this depends on the preference of each person.

3, and then in the back of the firecracker to draw a ground line, the line is more casual, straight or curved can be, so that the shape of the whole firecracker came out.

4, now start to give the firecracker color, the state of the fuse burning, painted yellow up, the top of the firecracker inside the color can be painted a brown.

5, and then to the upper and lower parts of the firecracker, also painted a yellow, if there are other favorite color, you can also paint up, the color can not be arbitrary free with.

6, the main body of the firecracker in the middle of the color, here to paint a red bar, this a hand-painted colorful firecrackers, painted, painted colors, can be light and then thick.

Step one, now the paper with a dotted line to draw a ready to draw a firecracker curve composition. (Refer to the picture above)

Step two, a string of firecrackers are mostly opposite each other side by side, very organized. In order to draw a little better, first use the dotted line to depict the approximate shape of the string of firecrackers.

Step three, a string of firecrackers is very dense, and high and low, there are inside and outside, so it is not good to draw, we have to find the trick, it is divided into two parts to draw. First draw the firecrackers exposed in the upper layer, along the dotted line with the curve of the composition of the trend to draw a small cylindrical shape. Note that is, draw a cylinder every other gap. (Refer to the picture above.)

Step 4, according to the cylindrical shape drawn in step 3, draw the small cylindrical shape hidden underneath in the reserved space, and the drawn firecrackers look very dense.

Step 5, draw the fuses of the firecrackers and the flash of the firecracker explosion. First along the two rows of firecrackers in the middle of the gap to the firecrackers painted fuse, painted fuse must be along the curve of the firecracker trend.

Then the firecrackers painted on the flash, flash layer by layer, to have the feeling of explosion, and finally in the flash of the perimeter of the firecracker debris has been blown up. Here the firecracker sketch part of the drawing is good, the following began to prepare the color pencils to the firecracker coloring.