firewood integrated stove *

firewood integrated stove is a very popular cooker, which has many advantages such as environmental protection, economy and beauty. So how to make a firewood integrated stove? Let's introduce the specific * for everyone.

Material preparation

Some materials are needed to make the firewood integrated stove, mainly including: cement, ceramic tiles, angle steel, screws, faucets, chimneys, etc.

Manufacturing steps

1. Building a hearth

First, build a hearth with cement on the ground, and then put bricks on the hearth, which can increase the surface area and make the bottom temperature more uniform.

2. Smoke window design

An opening, namely the smoke window, is designed on the hearth about 15-2cm from the ground, which is convenient for the smoke to be discharged.

3. Install angle steel

Select the direction, cut out angle steel with suitable width along it to support the oven, and then install them on the four sides of the cement stove.

4. Install a faucet

Add a faucet next to the stove to facilitate watering. The faucet should be made of metal, in order to avoid thermal expansion and cold contraction.

5. Install a chimney

Above the oven, build a chimney so that the smoke from the cooker can be exhausted and the room will not be smoked, which will affect the indoor air.

6. Install grates and ovens

Install grates and ovens, measure them according to the pre-planned dimensions, and then make grates and oven brackets with appropriate sizes and install them on the built angle steel.

7. Sprinkle cement

Finally, sprinkle a layer of cement on the cooker, which can make the cooker stronger when firing.

After making the firewood integrated stove, you can use it to make many delicious foods. At the same time, you can also enjoy the warmth and convenience it brings to your family.