How about a small household electric mixer, how to install it, and precautions. Nowadays, electric mixers are a must-have small household appliance in many friends’ homes. Electric mixers can be used to mix meat, fruits, and grains.
, let’s give you a detailed introduction to household small electric mixers, how to install them, and what to pay attention to.
The small household electric mixer is very convenient to use. It can save a lot of time, reduce the time of beating, and beat evenly. It also has various functions. It can not only beat eggs, but also make complementary food for the baby. It is also easy to clean. No
Of course, the installation is also very simple. First, insert the stirring rod into the small hole on the body and fix it to ensure that it does not move before turning on the power. If you want to change to another stirring rod, you can usually remove the stirring rod with one click.
That's it. Please note that you must strictly follow the correct steps in the instruction manual when installing, because if the installation is incorrect, there will be safety hazards. After installation, you should try it first to see if it can operate normally.
When using a small household electric mixer, pay attention to the voltage of the power socket, which must be consistent with the rated voltage. There are also mixers divided into snake-shaped mixers, beat-type mixers, and bud-type mixers. Different foods require different mixers.
They are different, and of course the number of gears is also different. For example, the flour is mixed with a snake-shaped mixer, using the I low speed, the stuffing mixer is mixed with a beater, the II medium speed is used, and the egg liquid is mixed with a bud type mixer.
Use the III gear high speed. After mixing, be sure to pull the lifting handle to lower the mixing barrel to the lowest position. After removing the mixer, you can remove the mixing barrel.
After using the mixer, clean it in time and put it in a cool place to dry.
Why is the household blender not spinning? Blenders have brought great convenience to our lives. They can mince meat, blend fruits, and blend whole grains. They can make many delicious dishes. However, like other household appliances, blenders need to be used.
Various problems may arise later. For example, a common problem is that the blender does not rotate. So what is the reason why the household blender does not rotate?
Let’s take a look below.
If the household blender does not spin, first check whether the power outlet is powered. If there is no power, the blender will definitely not work. Also, check whether the switch of the food processor is turned on. If it is not turned on, it will definitely not work. There may also be a stirring problem on the blender.
The rod is not installed properly, and the mixer has safety protection devices. If there is an abnormality, it will not rotate.
If these are normal, it is recommended to take it to professional maintenance personnel for maintenance. Do not disassemble the mixer without authorization to avoid more serious damage.
Many mixers are caused by a short circuit in the motor rotor or a short circuit in the commutator. If the mixer works for too long, the temperature of the motor will rise too high. Therefore, do not use the mixer for too long each time.
What everyone needs to pay attention to is that before using the mixer, it must be installed in place before it can be used safely.
After the mixer is used up, be sure to clean it in time. When cleaning, you can put a few drops of detergent and appropriate warm water. Do not put too much detergent. Then turn on the mixer directly and let it start mixing. Stir for a few minutes and then use flowing water.
Rinse with water and place in a ventilated place to dry.
How to disassemble and clean the egg beater of aca hand mixer. With the continuous development of the electrical age, the stirrer has slowly replaced chopsticks and is favored by more and more people. The stirrer can also beat eggs, which is more popular with everyone.
The most important thing is the aca hand mixer egg beater, and the aca hand mixer needs to be cleaned after use. How to disassemble and clean the egg beater is something that many people want to know. So how to disassemble and clean the aca hand mixer egg beater.
?
There is an exit button on the aca egg beater. If it cannot be pulled out, do not force it to open it. You can press the button with your hand, hold the egg beater with the other hand, and gently pull it out. Normally it is
One-click ejection of the whisk. If it cannot be disassembled, the method must be wrong. After washing the whisk, you can install it with one click. You can directly insert the stirring rod into the hole.
Of course, if you really can't remove it, you can ask after-sales service. If you dismantle it randomly, it will be damaged.
The structure of the aca hand blender is actually very simple. It mainly consists of five parts, namely the main unit, the stirring rod, the chopping cup, the egg-beating net, and the beaker.
Note that when using an aca hand mixer to beat eggs, the beating time should not exceed 5 minutes each time. The first gear is enough. The other gears are too powerful and are not suitable for beating eggs. You must also let the egg beater rest for a while.
before you can continue to use it.
After using the aca hand mixer, you must clean it in time and dry it in time. Do not expose it to the sun.
Disassembly diagram of hand-held and portable small electric mixers. There are more and more small household appliances on the market now. Hand-held small electric mixers are a must-have for many families. They can be used to beat flour, make juice, stir meat fillings, etc.
It can be used to make complementary food for babies. Of course, the blender must be disassembled and cleaned after use, but many friends do not know how to disassemble it.
The following is a detailed introduction to the disassembly diagram of handheld and portable small electric mixers.