7 materials

8 material forming and control engineering

9 material chemistry

10 materials science and engineering

1 1 material physics

12 financial management

material

A What do you usually do after graduation? What about the employment and income in recent years? Can you tell me something about your graduating class?

After entering the factory, the parts are designed and cast, they can't be used immediately. It is necessary to formulate a heat treatment process to strengthen them and ensure the life of the parts! Now most of my classmates are engaged in this major (metal heat treatment), some are engaged in metal forming, and others are gone! I have a bad respiratory tract, so I didn't do this major, because the factory is not suitable for me, and I am looking for another way out.) This major is mainly engaged in technology! (Jiamusi University) wwy

Our school graduates in materials science are all doing heat treatment. Other schools may have different directions. At our present age, facing graduation, there may be a lot of things. On the one hand, those who are looking for a job, those who take the postgraduate entrance examination, those who take the public property examination, and those who go abroad are all preparing. On the other hand, we have to study courses. We haven't finished teaching professional courses yet, and we also have internships in factories, which is comprehensive experiments. Four or five people will form a team to complete it. Because we are two majors, we will have to carry out a graduation project of a material this semester. However, children who study a major will not formally do the graduation project next semester. If they are girls, I don't think it is suitable to study engineering. Generally, boys in science and engineering will be more popular than girls. Good enterprises choose schools on the one hand, and people on the other hand are divided into boys and girls. The proportion of recruitment is also different.

I am a material software. I signed two Huawei companies, two Beijing Nankou Railway Bureau 1 TRE Software Company 1 Alpine Company 1 CSR Qiyuba Research Institute 1 Neusoft 9 postgraduate classes with 29 people. Single study materials are basically postgraduate entrance examination, and it is not easy to find a job. It is also a locomotive factory and a steel mill (Dalian Jiaotong University)

Material specialty can be divided into material processing engineering and material science and engineering (in fact, metal materials), and it is best to choose the specialty of material processing direction such as welding, casting, mold design, etc. (with high salary); Never learn metal materials, you can only do heat treatment when you come out (salary is below 2000 (Dalian Jiaotong University)

I don't have a job yet, and I don't know what to do. I can do a lot. Technical engineer or something. My classmates signed Chery, Midea, Foxconn, BYD, Chimei ... Those companies are not bad. (Zhengzhou University)

material forming and control engineering

A what do you usually do after graduation from material forming and control engineering? What about the employment and income in recent years? Can you tell me something about your graduating class?

I took the postgraduate exam. I chose this road because the university was not so good and it was not easy to find a job. (East China University of Science and Technology)

Anything related to machinery is ok, but our major is mainly mold design and manufacturing, casting, welding, etc. (Sichuan University of Technology).

You can do mold design. There are plastic molds and metal molds, and there are many kinds of them. The shell mold is more complicated and varied. Now I am designing the mold for connectors, like the plastic parts of those USB excuses. Our classmates take buses and monitors and so on. In fact, it depends on what job you are looking for. Even if the company looks for people in this field, after going, what you do is not necessarily to design molds, but to work related to molds (to be precise, it should be related to machinery). (Harbin Institute of Technology)

There are too many capable facts! As far as our class is concerned, there are those who go abroad, those who are in Shanghai, and those who take the postgraduate entrance examination. In short, all walks of life have our brothers and sisters, and what kind of job you can find depends mainly on your own efforts! (Harbin Institute of Technology)

Anhui University of Technology is a very good major, and the employment rate can be said to be 100%. This major is a relatively precise combination with steel, and the working environment may be worse in the future. After all, the work needs to be a first-line trainee (except for girls), and the work salary is still ok. As long as the factory signed is better, it should be more than 2,000 a month. Postgraduate entrance examination is also good, and the treatment of graduate students is much better than that of undergraduate students. (Anhui University of Technology)

A lot of work, we can do whatever the mechanical department can, and we can do workpiece design, production management, equipment engineers, molds and so on. The industry is electromechanical, automobile, auto parts and plastic molding! Basically all manufacturing industries! (East China University of Science and Technology)

I'm working now, and the employment rate of our major is quite high. Almost all of us have found jobs, and the salary is around 15002000. There are quite a few people taking postgraduate entrance examinations in our major. We are 94 people, 4 1 person, and we have been admitted to more than 20. (Henan Institute of Technology)

Our professional courses are mainly related to molds, and the basic courses are mainly mechanical design, so there are actually many directions for work after graduation, and anything related to machinery can be done. If the division is more detailed, it is the work of mold design. Although the mold is developing rapidly now, the starting point for undergraduates to engage in this industry is not high, and they can only start from a low level, which is also a * * * nature of design work. If they want to get ahead for at least 35 years, the market is still bullish. If you are a girl, it is recommended not to choose this industry. After graduating from our class, there are not many people engaged in work related to molds, mainly engaged in other kinds of work related to machinery, because many companies now require a mechanical background when recruiting people, which may not require you to be proficient, but at least know something about machinery, and then do sales, technical support and so on, which is relatively easy. It's not hard to find a job to graduate from the mechanical department, but the starting salary is not high. Let's take a jump of 3000 for the fresh undergraduates in our school here in Shanghai (East China University of Science and Technology).

Well, you can do a lot of things. If you learn casting, you can go to some factories that need tools. In short, you can go to ordinary factories and become an engineer or something. If you can, it's better to learn machinery and find a job. (Jiamusi University)

I took the postgraduate entrance examination, and now I am a graduate student. Life in graduate school is similar to that in college, so I have more time to myself. There are many things to learn. (Shandong Institute of Technology)

I don't know about the employment rate, but I know about the salary, about 1500 (Shandong light industry)

The employment rate is very high, almost all of them are employed. Average income. 1500 to 4000 (Harbin Institute of Technology)

Employment is very good, basically everyone can find an ideal job, but the income is not too high, basically around 1500. If you want stability, this major is good (Taiyuan University of Science and Technology)

The major of material control in our school is still easy to find. Every year, as soon as the senior year arrives, the company recruits people, and there are many job fairs, but the income in the mainland is not high, just 1000, and the coastal area may reach 2000, but it depends on personal ability. (Sichuan University of Technology)

B what does material forming and control engineering learn? What kind of study is suitable for? Are there any special requirements?

This major is to shape metal materials, strike iron, weld them, or heat, melt and cast them. It can also be formed of nonmetallic materials. This major is suitable for people who love to learn, and it is very tiring. If you learn it, you should have a good life in enterprises that mainly go to mechanical processing. I have graduated and work in Beijing (Taiyuan University of Science and Technology).

There are several major directions in this major: 1 welding 2, pressure processing 3, heat treatment 4, casting 5, surface treatment. In fact, it is a major that favors boys, and it is not easy for girls to find jobs. Of course, boys in this major are very easy to find jobs, and senior talents in this field are very scarce in China. The materials here are mainly metal materials. In recent years, many major universities have set up this major, both good and bad (Taiyuan University of Science and Technology).

First of all, this major is an engineering major, belonging to the mechanical major. People who like to study science are suitable for this major, but it is best to find a better science and engineering college to study this major, so as to ensure that it is easy to find a job. After graduating from this major, I am generally engaged in related industries with metal material processing, such as automobile production and mechanical processing. (Taiyuan University of Science and Technology)

It's good for boys to study this major, and they don't have to worry about their work, and their salary is ok, but it's not good for girls to study this major, because their work environment is not very good! However, it is still very promising for girls to study in this major! (Henan Institute of Technology)

In fact, this major has a wide range, and the focus of each school is different. As far as our school is concerned, it mainly involves material properties and molding methods, welding and casting, as well as heat treatment surface technology molds. If it is a boy, this major is good. If it is a girl, it needs to be considered. If you want to engage in design or research in this field in the future, you can also do it for girls. (Jiamusi University)

How about C Material Forming and Control Engineering in your school? What is the prospect of this major?

It's easy to find a job. This major is a national key discipline, and its development is ok, but it's boring to learn. Maybe it's depressing after entering the university. Not many people like this major, but it's easy to find a job now. (Harbin Institute of Technology)

To be honest, if you develop in the province, the gold content is still very high. If you want to go to other provinces in the future, you can consider other schools. Our employment rate has been at 99%, and that one percent is students who don't want to find jobs. . (Fuzhou University)

According to what the teacher said, it should be ok! It is a better one in our school. For the future development, I can only say that at present, this major is a major with better employment (Shandong Institute of Technology).

The Institute of Mechanical and Electrical Engineering and the Institute of Materials are the signboards of our school, and they are both easy to find jobs. Electromechanical hydraulic pressure is the best, and the welding and stamping of materials are good! (Taiyuan University of Science and Technology)

Is this major okay? Our class has a high employment rate. The overall salary level is 3000. SAIC, Baosteel and many famous foreign companies are okay (East China University of Science and Technology).

D is the major of material forming and control engineering good? What advice do you have for junior students who want to study this major?

Material forming and control engineering generally includes three main directions: welding, mold (mainly plastic mold and stamping die) and casting. For engineering, the employment of this major is not a problem. Among the three main directions, casting is the most common, and the working environment after graduation is a little worse, and it seems that the future development is not as strict as the other two directions, but some schools are not strict. I feel that no matter which direction, as a material major, Some courses of "Fundamentals of Materials Science" are called "Materials Science", which is still relatively important. It is necessary to have some knowledge about the main components and various properties of some commonly used materials. It is not necessary to remember every knowledge point, but we should have an understanding of them, know which courses we have studied, and find them in books. Memories are miscellaneous, so we should always look at them and have some professional background. For some concepts that we don't understand or don't know, we should always ask or search on Baidu. I also often use Baidu to search, and the effect is good. The direction of our school is not very clear. My current job is mainly casting. I suggest that it is better to engage in mold or welding if I am interested or capable. If you take the postgraduate entrance examination, welding is better, and the treatment you get out is also good (Anhui Engineering Science and Technology)

It's easy to find a job. Generally, it's mainly state-owned large and medium-sized enterprises, so the salary is good. But in the first two years, it's good to work hard in the front line, and it's good to get mixed up. If you can't get mixed up in the front line, the environment is not good. I suggest that rich people don't choose this major, because all of them are poor (Anhui University of Technology)

It is best not to choose the major of materials science. It is too difficult to find a job, and there is basically no counterpart (Shandong Light Industry)

Do you want to find a job or do you want to do research? If you want to find a good job, you should learn to weld better. If you want to do theory, you should learn to cast better. It's very tiring to learn engineering if you don't want to work hard. If you have your own interest in processing, you can learn these things ... because it's also a very gratifying thing when the processing methods designed by you can improve the performance of all aspects of products (Henan Institute of Technology)

The major is very good and the prospect is good, especially welding. We must learn the professional course well! Take it seriously during the internship! Do more hands-on operations! If possible, you'd better get a welder's certificate at school! (Henan Institute of Technology)

E is it suitable for postgraduate entrance examination or work after graduating from the undergraduate course of material forming and control engineering?

If you have a solid grasp of professional courses at the undergraduate level, there is no need to take the postgraduate entrance examination. If you think that you don't know anything about your major, you can consider taking the next study. Of course, the premise of these is that if your family allows, going abroad for postgraduate study will require you to have a solid foundation, otherwise the road to study will be very bitter! (Huazhong University of Science and Technology)

/blog/static/9431074220088115337932/edit/There are many wonderful professional introductions in this blog. I suggest you go and have a look.

If you want to find a good job in order to come out! For the students majoring in mold, it is mainly aimed at learning autoCAD,PRO/E and UG software! These are the main indicators considered by employers! And on this basis, we should also learn professional theoretical knowledge properly! If it is the direction of learning welding: it is recommended to learn more about welding methods, welding processes, welding processes and other theoretical knowledge! The wider you learn about welding, the better! (Harbin Institute of Technology)

Get more certificates (computer, foreign languages) in the university, learn some three-dimensional modeling software, graduate to a famous enterprise, and do technical sales for two or three years, which is a better development direction (Harbin Institute of Technology)

Freshman, of course, it's time to just get in touch with the university .. It's the key to get familiar with the university environment and make more friends. Study: It's still a little early to say this. Let's lay a good foundation first. There are many courses to learn, such as advanced mathematics and engineering drawing, which are all key courses, as well as English.

G material forming and control engineering graduate to which unit is better?

Europe, America, Japan, Taiwan, state-owned enterprises and private enterprises (Sichuan Institute of Technology) are preferred.

It depends on your small direction, such as mold, welding microelectronics, etc., working in steel works, mold companies, solder paste companies, SMT and so on. If you are a graduate student, the treatment will be good! Although the undergraduate job is easy to find, the salary is not very good. (Harbin Institute of Technology)

I think: this is a technical job, and it is also good to go to some small enterprises. They will pay great attention to you and give you many opportunities to learn. You can change after you have work experience, and it will be much easier then. It also depends on the individual's personality. If you want to settle down, you will find some formal large enterprises, and it will be good if you have a length of service. (Shandong Institute of Technology)

The knowledge of material forming and control is mainly in the mold, and the employment scope of this major is mainly in the manufacturing industry. Some automobile manufacturing enterprises (such as Guangben, Toyota, Beijing DaimlerChrysler and other companies) have higher treatment, but the threshold of these enterprises is also high, and they are also good in the electronics industry (such as mobile phone shell molding). PS: If there are contents about semiconductor manufacturing in professional courses, you can also enter the semiconductor industry (such as TSMC and Shanghai SMIC). (Huazhong University of Science and Technology)

This major is mainly mechanical work. If you have no other ideas, such as postgraduate entrance examination or civil servants, then go to the mechanical industry, such as automobile molds (East China Institute of Technology).

Because this major mainly studies mold design and manufacturing, it is best to get employment in foreign mold factories in Shanghai, Shenzhen and some big coastal cities, or you can enter automobile manufacturing or other well-known mechanical processing and manufacturing enterprises. As far as my graduated classmates are concerned, our professional employment rate is still relatively high, and most of the enterprises that everyone has entered are quite good. (East China University of Science and Technology)

H

The employment situation of this major is getting better every year in recent years, but the working conditions are a bit poor. Generally, universities are not allowed to transfer majors, but you can take the postgraduate entrance examination in other directions. The courses of freshman and sophomore are the same as those of mechanical design, and it will be easier to change mechanical design in the future. In fact, the most important thing in college is to form a mature way of thinking and dealing with people after four years of exercise. It's not what you read that matters, but how you read it. If you really don't like this major, you can only change your direction when you take the postgraduate entrance examination. Learning more during college will be good for the future (Henan Polytechnic)

materials chemistry

A What do you usually do after graduating from materials chemistry? What about the employment and income in recent years? Can you tell me something about your graduating class?

Many of them mainly go to chemical companies, pharmaceutical companies, chemical companies, etc., and some of them go to graduate school (Jilin University)

Generally, you just enter an enterprise and become a technician after an internship. After a few years, you may become a small official. Some people who engage in sales with professional knowledge can enter a research institute, which is very difficult (Shandong Light Industry).

Undergraduate students can do anything when they come out, but they must go to the grassroots level. If you don't want to be a worker in a factory after graduation, you'd better not study this major. Material chemistry is a very good science, and it will certainly make great progress in the future, but you must choose a good school, which is too far from the black university (Heilongjiang University)

The graduate employment prospect of the major of Material Chemistry is still ok. I graduated from a cement factory. In the laboratory, all the conditions are good. Other students are all in chemical factories. This means that there is no activity at home, but they just send their resumes to apply for jobs at home. Then let's not say that most of the students are now engaged in technical treatment in the unit, and it is said that the best is more than 3,000. I'm not sure whether it's true or not. After all, the words came from someone else's mouth, not from the passbook. The important word is chemistry. If you graduate, you should know that after graduation, your work is only related to one or two words of your major. Generally speaking, the major in chemical engineering is ok now. (Jinan University)

I'm working, and it's hard to find a job in the major of Material Chemistry, which is an interdisciplinary subject. Few universities offer this subject, and it's not convenient to take the postgraduate entrance examination. It's a pure science, and a lot of learning is very complicated! There is nothing to master, and the university stage is purely informative learning! It is suggested that college students should not apply for this major. If they like chemistry more, they can choose chemical engineering and technology, analytical chemistry and applied chemistry. These majors are practical and easy to find a job (harbin university of science and technology)

At present, there are two directions in materials chemistry: metal and nonmetal. Wuhan Institute of Technology is about nonmetal. To be honest, this major is not good at present, because the detailed direction has not been decided, and the basic courses and professional courses are very extensive. I said that our school focuses on the testing of old materials, including performance introduction and research methods. They are all relatively broad directions such as cement, glass and ceramics. It's not easy in the current tight employment situation. Of course, some people go to the electronics industry like Shengyi Skyworth, but it's necessary to have a strong personal ability. It's necessary to have a good language organization ability in school. If you don't like it, it's a fool ... These industries are basically sunset industries, but it's indispensable that the salary is not high. This is employment. We have more postgraduate entrance examinations, and two-thirds of them are on it! Because of the great pressure, I usually study better, and the atmosphere in our class is good, and my studies are good. It is easy to get into our school, including those from Zhejiang University, Academy of Sciences and Design Institute! Anyway, you should be a cadre in school, not a lot, just exercise your ability, and you can make many friends. You should also study almost the same, (Wuhan Institute of Technology)

After the undergraduate course, materials chemistry is more for graduate students, or do some work related to materials, for example, if English is good enough, but I am now engaged in the work of non-ferrous metal smelting, which depends on the situation. In materials chemistry at Nanjing University of Technology, I mainly learn the basic knowledge of materials. Therefore, if I work in the future, I will use what I have learned to do in-depth research. But the better way out is to go to school. (Nanjing University of Technology)

The material chemistry of each school is very different. Simply put, there are two categories: partial material and partial chemistry. Specifically, there are many things to learn and a wide range of research, and each school is different. Moreover, this major is new in the whole country. Our undergraduate major is inorganic nonmetallic materials. When we graduated, most of our classes were studying for graduate school, most of them went to battery factories and some went to glass production enterprises. (Harbin Institute of Technology)

Our college has just been built, and it's only been five years now, so it can't be compared with some other schools in terms of teachers and scale, but our college is developing relatively fast. The undergraduate job is relatively easy to find, but the salary is not very good. What our classmates are looking for is probably between 1000 and 2000. The best job for our school at this stage is to find a place (Sichuan University)

There are many employment options for students of material chemistry after graduation. From the surface, we can see that both materials and chemistry can be tried, but at the same time, the subjects of material chemistry study are too complicated, and everything can be reliable, but nothing is very precise. There are several options for a major like ours: first, take the postgraduate entrance examination, focus on one direction, and make the knowledge system single-minded; Second, quality management in enterprises is generally not suitable for girls, because it is necessary to master various processes in the workshop for future management. Third, technicians mainly do some work in the laboratory, which requires at least two years of experience to be independent. Fourth, sales, I think material chemistry should generally have studied instrument analysis and can make great achievements in the field of analytical instruments. Just as the above-mentioned technicians will become teachers in the analysis industry in the future, the University of Science and Technology has a great advantage in chemistry. There were more than 50 people in our session, and more than 50% of them were admitted to graduate schools. The other employment rates are 100%. The above aspects are our employment situation, and I am now doing analytical instruments. If I am interested in sales, I can recommend several big companies. For example, food safety, which is now in full swing, is a good opportunity for the analysis industry. Generally, the enterprises involved in material chemistry are chemical enterprises, such as coatings and materials. However, some chemicals are harmful to human body when studying chemistry in the workshop. (Qingdao University of Science and Technology)

Private enterprises are tired, while state-owned enterprises are relatively laid-back. However, working in some state-owned enterprises can really make people feel bored and a little dawdle. My friend told me. Pay attention when signing the work agreement, don't listen to those people's bluff, no matter how good it is, it's empty, and the so-called treatment that is not written in the agreement is basically a lie. (Jilin University)

Material chemistry is still an unpopular major, and many of my classmates are now engaged in work directly related to chemistry. General chemical companies want such people. I have switched to biomaterials now. . (Anhui Normal University)

In fact, my major is a hodgepodge. I learn everything, but I'm not good at anything. I go to different places after graduation, depending on the direction of my major. Most of my classmates have chosen the postgraduate entrance examination. If the school is not good, it's hard to find a job unless you are better! Students go to chemical plants, glass factories, ceramics, batteries, and other things. In fact, you can't do anything after graduation, and you have to come back to society because you don't know anything! I'm in graduate school now, and it's hard to find a job, (Shenyang Dongda University)

This major is too unreasonable, and it has a wide range of studies and is not targeted. After graduation, it is difficult to find a good job related to this major. For other professional jobs, there is no professional advantage, and it is relatively difficult to find. The employment rate in our class is very low, one is in a bank, and three or four are in companies in material processing in some small cities. (China Ocean University)

I think it's best to take the postgraduate entrance examination and further study. This is mainly a research subject. Of course, it also depends on what university you go to. Now there is a big difference between a good school and a poor school. Of course, it's good to find a job.

There are 36 students in our class, 13 of whom attend graduate school, and several of them have postponed their graduation. They are looking for jobs, mainly for testing, or for skills in rubber tire factories. Their salaries range from 3,000 in Shenzhen to 1500 in Qingdao, and more than 1000. It is well known that it is difficult to find jobs after graduation, and the employment form is grim! But don't apply for material chemistry in our school. It's a newly established major, and it's difficult to find a job. Like the material major of Jilin University, it has close contact with many automobile companies, which is very good. The salary is also very high. Our school, which is similar to chemistry, goes to chemical plants. More than 1000 a month. (Jinan University)

It's a good major, but it depends on how you do it (Liaoning University)

Several students in our class went to Foxconn, some from Asustek, and some from other jobs. Generally speaking, their employment is ok, because everyone related to chemistry can try it, and it is still relatively wide, mainly because of their academic performance! (Nanjing University of Technology)

I don't know if I graduated from a basic undergraduate course. Those who didn't engage in this major are mostly graduate students (Nanjing Institute of Technology) because there are very few enterprises in this field in society or they just started and basically need a master's degree.

I am a graduate student. As for work, this major is not easy to find (good) because many companies don't know what this major is for. Therefore, we can only compete with metal, inorganic and organic materials majors, as well as chemistry. I think I'll take a chance. I once found a big Korean company and didn't go. I haven't been to a job fair. I found it online. My classmate's work is not very good either. At least I think so. (China Ocean University)

I graduated last year, and now I'm studying for graduate school in Beijing. I'm unemployed. Now the employment in the whole country is not ideal, and Anshi Normal University is no exception, so I should be mentally prepared (Anhui Normal University).

Material chemistry is a combination of materials and chemistry. It is a new discipline. It is a basic course for studying materials and chemistry. Compared with my materials science, basic chemistry, physics, inorganic organic materials, polymer chemistry, polymer physics, etc., it mainly focuses on inorganic nonmetals such as ceramics, coatings, etc. It belongs to the frontier of material chemistry, and has learned more knowledge, but it is not very precise. However, the employment is not ideal. It is suitable for people interested in chemistry, and these things are more obscure and boring. ()

/blog/static/9431074220088115337932/edit/There are many wonderful professional introductions in this blog. I suggest you go and have a look.

B what is the chemistry of materials? What kind of study is suitable for? Are there any special requirements?

I majored in materials. The undergraduate course is very basic, similar to chemistry, but superficial, covering a lot of contents but not in-depth. I study all kinds of chemistry and physics. The specialized course is the introduction and preparation methods of polymer materials, metal materials, inorganic non-metallic materials, nano-materials and composite materials, and the data analysis methods of experimental results. I personally don't recommend this major, and we feel it's a pity to give up because we have no choice (Heilongjiang University).

Don't learn material chemistry. It's useless. We have learned some nanotechnology, but we can't learn anything. It's not practical at all. It's just a scratch, and graduate students are not so good. If you want to learn chemistry, you'd better learn polymer instrument analysis (Heilongjiang University)

Originally, material chemistry is a popular major in the world, but this major in China is not very good. I heard that this major in Sichuan University is better. I am from Normal University, and this major is not ideal. Material chemistry is suitable for people who are very interested in chemistry. The subjects of this major are related to the nature of materials in daily life. Study the phenomena of various materials to explain these phenomena. If you are interested in this major, you'd better go to another school, which is not ideal.