Curtains are flexible to open and close, light in weight, easy to use and can be adjusted at will. They are durable, beautiful in appearance, can be used as windows to shade or block the line of sight, and are widely used in houses. Installation method: side installation. Traditionally, side mounting is adopted because it is more convenient and firm to install. Install in the air. When the side of the window frame cannot be installed, upward installation is a common installation method. It is more difficult than side loading, so it is used less. When the blinds are installed outside the window, they should extend 20-30㎜ to both sides along the height direction. When installed in the height direction, it is best to be about 100㎜ higher than the upper window frame. The specific dosage can be selected according to the actual situation. If you want to install blinds in the window frame, subtract 20㎜ from the height and width of the window frame.

Venetian blind products have different surface treatment methods, so they should be selected according to their needs. Several common methods and characteristics are as follows. Surface spray molding. Plastic is attached to aluminum alloy by plastic spraying process, which has the advantages of acid resistance, alkali resistance, oil resistance, aging resistance, impact resistance and insulation, and its firmness is better than that of painting. Bake (spray) paint on the surface. Choose high-quality amino flat paint, rich in color and firm in baking paint. Spray flowers on the surface. Using surface spraying technology (various design trademarks), the curtains have flower-shaped colors. Lifting adjustment venetian blinds's lifting adjustment means that when the lifting rope swings to the inside of the curtain for about 30 degrees, the lifting rope can freely contract, and the venetian blinds of the curtain changes height with the contraction of the lifting rope. When it is adjusted to the position you want, just swing the hanging rope to the outside of the curtain 15 degrees and then relax, and the shutter can stay in this position. Pull (rotate) the blade angle adjustment rope (lever) to adjust the blade at any angle.