For ordinary gas-fired pressure cookers, if you want to eat immediately, you can put it directly under the faucet and let it cool down quickly. Put the washed rice and water together in the pressure cooker. After lighting the gas stove and starting to exhaust, the rice will be cooked in just 8 minutes. The rice cooked in this kind of pot is more delicious than ordinary electric rice cookers and electronically controlled pressure cookers.

1. Rub oil:

The sealing ring of a new unused pot has high elasticity. The lid, body and handle should be cleaned before use before use. Wipe the edge of the pot with oil to make it easier to close the lid.

2. Put food:

When putting food, neither food nor water should exceed four-fifths of the pot’s capacity, and neither water nor soup should be less than 400 ml (about two bowls) ).

3. Closing the cover:

Before closing the cover, check whether the exhaust pipe is unobstructed, the anti-clogging cover is clean, whether the safety valve is intact, and whether the float can move up and down freely and is falling. Location. Place the pot lid flat on the pot body to fix the pot body, and let the pot lid rotate clockwise until the upper and lower handles are completely overlapped. At this time, it has just moved to the working position and the float valve has been fully exposed.

4. Heating:

After closing the lid, use high heat to heat it. When you see a small amount of steam slowly being discharged from the exhaust pipe, turn the pressure limiting valve to the exhaust position. pipe, and then the float will rise until the exhaust pipe "hisses" the exhaust. You can lower the furnace temperature appropriately and keep exhaust until cooking is completed.

5. Cooling and deflating:

After cooking, it can be cooled naturally at room temperature. If you want to eat it immediately, you can use the forced cooling method (that is, pour it with water or soak it in (in water) and reduce the pressure. After cooling, you can gently lift the pressure limiting valve to release the remaining gas.

6. Open the cover:

When you see that there is no steam coming out of the exhaust pipe and the float falls, you can open the cover in the counterclockwise direction. If the float does not fall, it means there is still pressure in the pot. At this time, the air pressure interlocking device will act as an insurance and the pot lid cannot be opened. Do not open the lid forcefully. Use chopsticks to push down the indicator valve to clear the remaining air in the pot before opening the lid.