1. First, you have to determine the type of plant vs zombie character you want to play, and then determine the color you need. Buy clay of corresponding color. Remember to seal the clay. We need some thin wire. It is best to buy a set of tools for making clay by hand.

2. Analyze the structure of the plant role you want to be, such as the most common pea shooter. It mainly consists of an inverted cone-shaped base, green stalks and green spherical peas.

3. Knead the clay of the corresponding color into the corresponding geometric shape, and then refine and improve it with some gadgets to make it look like a shape.

4. However, it should be noted that clay is soft and difficult to support before air drying, so when making a structure like a stem, an iron wire needs to be inserted to support it.

5. Before the clay is dried, connect all the parts together, and they can be bonded together by direct contact. If it cannot be bonded, dip a small amount of water or latex in the joint.

6. Trim the appearance of the joint with tools or hands. Next, observe the details of plant roles, such as eyes. It is to use black clay, take a small amount, make it into strips with tools, then bend it into radians and gently stick it on the face of the bean shooter with tweezers. Other details are the same, so the production needs to be careful.

7. After kneading, it can be air-dried. If you are not in a hurry, you can air dry naturally and pay attention to dust prevention. If you are in a hurry, you can use a hair dryer to speed up the air drying. Air drying to obtain the finished product. You can also paint a layer of transparent nail polish on the outside of the work according to your personal preference. Air drying can make the surface shiny and not easy to stick to dust.