Honda Binzhi is equipped with an inline four-cylinder/16-valve /DOHC/i-VTEC/ in-cylinder direct injection engine, which is matched with a 6MT manual gearbox. The maximum power (kW/rpm) is 96/6600 and the maximum torque (N m/rpm) is 155/4600.
The relationship between the vehicle itself and fuel consumption;
1, the fuel economy of the whole vehicle, and the parameter matching of each part of the power system has an influence on the fuel economy. The parameter matching of each part of the power system mainly includes the engine, gearbox and main reducer. When the engine works in the range of medium and heavy load, the effective fuel consumption rate is the lowest and the fuel economy is the best.
2. When the gearbox and the main reducer are matched properly, the engine with small displacement can obtain the best fuel economy. However, a small displacement engine will inevitably make the car's power performance poor. If a car is required to have a certain acceleration ability, only a large displacement engine or a medium displacement engine can be selected. At this time, the medium displacement engine can obtain better fuel economy on the premise of providing enough acceleration.
Expand data and reduce unnecessary idling while driving. When the engine is idling, because the speed is too low, the formation conditions of mixed gas are poor and the concentration is too high, which will increase fuel consumption. Therefore, when the car needs to stop for a long time, it should be turned off.
Keeping the car clean and tidy can effectively reduce the weight of the car. Unnecessary items in the car should be removed as far as possible, and sundries in the chassis should be removed in time. Try not to put anything on the roof to avoid increasing wind resistance and fuel consumption.
Pay attention to warm up the engine when the cold car starts. When the temperature rises to 30-40 degrees, start it. After starting, step on the accelerator lightly and shift up in turn. When the car is running, the engine temperature is controlled at 85%-95%. Normal driving temperature is also one of the necessary conditions for fuel saving. Too high or too low temperature will lead to an increase in fuel consumption.
Baidu Encyclopedia-Binzhi