Current location - Recipe Complete Network - Diet recipes - Matters needing attention of Daoxiao Noodles robot
Matters needing attention of Daoxiao Noodles robot
Check the balance of the machine first, and keep it horizontal and not inclined; Observe the blade of Daoxiao Noodles robot and check whether it is normal (subject to no residue, gap or obstacle on it); The cutting panel should fix the bayonet with Cato without great shaking; The screws around should just catch Cato.

1, after the Daoxiao Noodles robot is firmly placed, plug in a 220V power supply (it is recommended to use a voltage regulator for connection in areas with unstable power supply; Ensure that the ground connection is normal); When the indicator lights of eyes and chest flash for several seconds without any abnormality, the next operation can be carried out.

2. After checking that there is no abnormality in the control button at the bottom of the left side of Daoxiao Noodles robot (from left to right, it is green, red, blue and blue respectively, and the functions of the machine movement controlled by the button are: start, pause, move down and move up respectively), press and hold the blue up button to make the robot's right arm rise to the maximum height.

3. Take off the panel in a balanced way, and knead the mixed dough into a crescent shape (crescent shape is the best Daoxiao Noodles dough state), so that the dough will not slip when adhered to the panel, and then put it on the supporting plate of the left arm.

4. Gently shake the blade by hand to ensure that the blade is fixed; After detecting that there is no looseness in the fixed blade nut, click the blue drop button to lower the blade held by the robot's right hand to a position 0.5CM higher than the central surface of the dough.

5. Press the green start button, and the machine will enter the formal working state.

6. Press the red stop button at any time according to the required amount of noodles. When the robot arm stops working, other things can be handled. If it doesn't stop, try to press the red button again. If the robot arm is still working, please cut off the power supply, wait a moment, and then start the repeated1-6 operations again. If the above state still appears, please contact the agent or company technicians immediately.

7. When the cutting edge of the robot reaches about 1CM away from the panel, the machine will automatically stop the cutting task and slowly rise. At this time, you can't press any button at will, just wait until the cutting arm returns to the program setting point.

I also have to say that people's style is high, they don't eat, drink or rest, and they work for 24 hours in a row, which consumes two or three degrees of electricity. The craft is also very good. You can peel 100 noodles in one minute. This Altman is not only a good worker, he can also attract customers. Tourists from the south to the north pass by the hotel gate, and they always look twice and take a picture or something. Especially for children, they have to eat a bowl of noodles made by Altman. After a busy summer, Altman was rated as an excellent employee in the store. Well, brother Xu, the foodie, came here to test the skill of this special chef.