Superior induction cooker as a brand more well-known induction cooker, in the use of sometimes there will be boot failure. So what are the reasons for the power-on failure and how to solve it?

First of all, when using the Nepalese induction cooker, you need to make sure that the power supply is normal, the plug is in good contact and whether it is installed on a stable plane. If all of the above are normal, but the induction cooker still can not be turned on normally, then it may be caused by the following reasons:

1. Power supply failure. Check if the power header is normal, try a different outlet. If it still does not work, you may need to go to the maintenance center for overhauling and processing.

2. circuit board damage. May be the induction cooker long time use or accidental collision caused by circuit board damage, need to change the new circuit board.

3. Temperature sensor failure. If there is a problem with the temperature sensor in the oven, it may cause the induction cooker can not be turned on. In this case, you need to replace the temperature sensor.

The next step is to solve the problem:

1. You can determine whether it is a power failure by checking whether the power head, socket and plug are in good contact, and if it still doesn't work, you can only go to the after-sales center to solve the problem.

2. If the circuit board is damaged, you need to contact the after-sales center to repair or replace the circuit board.

3. If the temperature sensor is faulty, you need to replace the temperature sensor.

In short, the Nepalese induction cooker turn on failure can be checked from several aspects, including power failure, circuit board damage and temperature sensor failure. If you can't solve it by yourself, it's better to contact the after-sales center to avoid bigger problems. In use, it is recommended to follow the correct method to operate, as far as possible to avoid failures.