You must first check whether there is enough water or antifreeze in the water tank. If not, fill it up before starting. In addition, it is also necessary to determine whether the lubricating oil has been added to the specified scale line and whether there are potential safety hazards in various parts. If there are potential hazards, they must be eliminated as soon as possible before starting.

2. Manual startup of diesel generator set: After the alarm system is tested normally, the control switch is turned to manual position, and the diesel generator set can be started by itself.

3. Stop the diesel generator set: Turn the control switch to the stop position or press the red emergency stop button to stop the generator. In case of emergency, you can directly press the emergency stop button to force the machine to stop. If you press the red emergency stop button, you must return to the original position, otherwise the generator will not start.

4. Switch to automatic mode.

Turn the control switch to automatic, and the control switch must be placed in the automatic position together with the automatic power switch (ATS). When the power supply stops, ATS will send a start signal to the generator control system, and the generator will start automatically.

Stop by yourself

When the control switch is switched to stop, or the automatic mode is still maintained, but the commercial power has been restored, ATS will send out a stop signal, and the diesel generator set will automatically stop. /faf2b 2 1 193 13b 07 e 774 eff 5003d 79 12396 DD 8 cf 3？ x-BCE-process = image % 2f resize % 2Cm _ lfit % 2Cw _ 600% 2Ch _ 800% 2c limit _ 1% 2f quality % 2Cq _ 85% 2f format % 2Cf _ auto