1, open the machine to check the appearance first, after everything is correct, the sausage grilling machine will be placed on a firm and flat workbench (desktop, counter). Plug in the power supply, first open the hot dog machine on the power switch, the indicator light, and then look for open motor switch, the roller began to rotate smoothly, and then the thermostat knob clockwise rotation, the temperature scale on the knob of the Taiwan sausage grilling machine and the panel of the red triangular alignment, the heating indicator light, the roller inside the electric heaters began to heat, the knob continues to rotate clockwise about 150 degrees to stop, when the temperature of the machine to reach the set value, the temperature indicator light. When the temperature of the machine reaches the set value, the heating indicator light will go out and the thermostat indicator light will be on, indicating that the temperature has reached the set value. Aishang you sausage grilling machine, desktop sausage grilling machine instructions, luxury grilled hot dog sausage machine

2, the pre-prepared sausage, parallel emissions in the sausage grilling machine | sausage grilling machine price | Taiwan sausage grilling machine | hot dog machine | sausage machine | grilled sausage | grilled sausage practice | Beijing sausage grilling machine relative to the two roller in the middle of this time sausage in the opposite direction to the beginning of the rotation of the heat, the discharge of sausage should not be overcrowded and staggered with the roller shaft at the two ends of about 10mm distance, when the sausage is not too dense and the rollers are about the same. 10mm distance, when the sausage baked to the cooked, can smell the sausage flavor, color and lustre become dark and hair bright, can be eaten, sold.

3, usually grilled sausage machine grilling temperature should be set at 120-160 degrees appropriate.

4, Taiwan sausage grilling machine **** there are 2 groups of temperature control devices, respectively, when the production demand is not large, just open a group, the front row of a few tubes to heat up the grill, such as the production needs to be increased, and then open the two groups at the same time, so that electricity can be saved.

5, hot dog machine rollers below the chassis is only used not to take over the sausage on the drip of the oil, usually also available sausage preheating, but should not have baked sausage in the chassis, so as not to finished products become dry and hard.

6, continuous baking, every 4-5 hours to clean the sausage grilling machine roller.

7. If there are stubborn stains on the rollers, dip them in hot water detergent or wash them with a wire ball and dry them with a towel.

8, unplug the power after use, the Beijing sausage grill machine clean, and dust protection.